DRF1301

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DRF1301 is a power distribution switch, load driver and integrated circuit (IC) that is designed to convert unregulated input voltage into regulated voltage outputs. It has wide applications in the industrial, commercial and automotive sector. It is also suitable to be used in high-power, high-density Power Distribution Systems (PDT) as well as in mission-critical applications.

DRF1301 IC has the ability to operate in two modes. One, it can be set to Digital-to-Analog (D/A) mode, which means that the output voltage is adjustable and is determined by a digital control signal sent to the VIN pin of the IC. Secondly, it can also operate in linear mode, where the output voltage is determined by a feedback loop system. Both of these modes allow the DRF1301 IC to be used in wide-ranging applications depending on the specific power distribution scheme.

The key features of DRF1301 IC include the ability to operate from an unregulated input voltage range of 5.0V to 20V; a rated output current up to 4A; an output voltage range of 0.1V to 14V; and thermal shutdown features to protect the device from over-current, under-voltage, or over-temperature conditions. Apart from that, the DRF1301 also utilizes a switching frequency of 200KHz and fast transient response (FRT) technology to ensure fast load transients, low noise and fast dynamic response capability.

The working principle of the DRF1301 IC is as follows. An unregulated voltage is provided at the device\'s VIN pin connected to either a battery or other power source. The IC uses a switchmode technique to step down this input voltage to a regulated output voltage via an efficient switching converter. In D/A mode, the output voltage is determined by a digital control signal. In linear mode, an external feedback system adjusts and regulates the output voltage.

When using DRF1301 IC in Power Distribution Systems (PDT) applications, the board should be designed in accordance with the associated datasheet. In order to provide load current up to 4A, an external MOSFET should be used to amplify the current capability of the IC. The use of an inductor is also recommended to improve the efficiency of the converter and provide a better transient response.

DRF1301 IC is an ideal solution for general purpose power switching applications such as providing the standby voltage for system boot-up or various other applications. This IC is specifically designed for cost-sensitive applications due to its low cost and high-reliability features. The use of DRF1301 ensures the smooth power distribution across the system and thus, enables the system to operate in a reliable, safe, and efficient manner.

The specific data is subject to PDF, and the above content is for reference