DS1045S-3/T&R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DS1045S-3/T&R delay lines are an important type of timing device used in the fields of signal synchronization, signal transmission, and digital signal processing. Generally speaking, they are used to delay signals in order to accurately control the timing of specific operations. As a digital delay line, DS1045S-3/T&R delay line is a linear composite panel comprised of a three-stage right-angle delay line and a two-stage T&R delay line, with delay times of up to 5.3 ms (1 msec/stage).

The DS1045S-3/T&R delay line is well-suited for many timing applications, from audio synchronization through image shift control and providing fixed signal delays. Its ability to provide high-speed and high-precision signal delays make it well-suited for synchronization, sampling, and multiplexing for a variety of applications.

In signal transmission applications, DS1045S-3/T&R delay lines can provide several benefits. Firstly, they provide synchronous transmission of signals from one point to another, allowing more effective coordination and data communication. A better-synchronized signal will have a better time-division multiplexing ratio and provide more accurate reception, allowing for a higher-speed, higher-efficiency signal transmission. Secondly, they can also reduce or delay the reflection of signals, allowing it to arrive at its destination in less than the normal propagation time.

In digital signal processing applications, DS1045S-3/T&R delay lines can also provide several advantages. By delaying the signal, they can act as a digital filter to reduce the effects of noise and distortion in the signal. This can be especially useful in applications such as imaging, where processing of the signal often requires a delay of the signal in order to improve the results. In addition, the delay of a signal can also be used to control the timing of specific operations, such as for synchronization of multiple chipsets.

As for its working principle, the DS1045S-3/T&R delay line operates by using the wave propagation properties of insulated conductors. The line is basically a composite panel, consisting of three sections in parallel with each other. The first section is the T&R delay line, which uses a series of insulated conductors to propagate the signal in a triangular wave form. The second section is the right angle delay line, which uses a series of insulated conductors to propagate the signal in a square wave form. Finally, the third section is a series of capacitor-resistor networks to provide additional delay or control the signal\'s amplitude.

The length of propagation in any of the sections can be adjusted to vary the signal delay. The T&R delay line can provide a signal-delay of up to 1 msec/stage, while the right-angle delay line can provide a delay of up to 3 msec/stage. By varying the signal-delay of each section, the total delay provided by the DS1045S-3/T&R delay line can be increased up to a maximum of 5.3 ms.

Overall, the DS1045S-3/T&R delay line is an excellent choice for timing applications in fields including signal synchronization, signal transmission, and digital signal processing. Its adjustable delay times and high levels of accuracy make it well-suited for precision timing requirements, while its low cost and easy setup make it convenient to use.

The specific data is subject to PDF, and the above content is for reference