DS1836D-10

The DS1836D-10 is a power management integrated circuit (PMIC) supervisor that provides system designers with flexibility and a wide range of features in order to protect the system from malfunctions and to improve power management efficiency. It monitors the system power supply and reset signal lines while performing various other functions depending on the configured setting.

The DS1836D-10 is a single-channel, voltage-monitoring IC with an optional manual reset feature and precise thermal reset timing. It is designed for use with a single- or dual-rail power supply, and it supports a wide input voltage range from 2.5V to 17V. The DS1836D-10 offers two dedicated output pins that can be used to indicate either a power failure or an input voltage level above the trip point. These two pins are designed to drive the system reset and system status output pins in a wide range of applications.

The DS1836D-10 offers an onboard feature for manual reset. This feature allows the user to activate a reset signal using a pushbutton or switch, providing an additional level of control to the system. Additionally, the DS1836D-10 provides a low battery detect feature, allowing the user to detect when the power supply drops below a predefined voltage level.

The DS1836D-10 is designed to operate as an active power management supervisor in order to detect faults, brownouts, and overvoltages, and to reset the system when such conditions occur. The integrated internal core and push-pull outputs are designed to interface directly with standard logic chips and allow for quick response to system events.

The DS1836D-10 provides an efficient and configurable voltage monitoring feature to prevent a system failure due to overvoltage or undervoltage. It allows the user to configure the threshold voltage that triggers an output pin when exceeded. This feature also provides system designers with flexibility in controlling the reset timing based on the configured trip point voltage.

The DS1836D-10 also incorporates a precise, thermal reset feature that helps to protect the system from over temperature events. Its integrated, temperature-sensing elements allow it to detect sudden temperature changes and internal conditions, and to initiate a reset signal when the system temperature reaches a predefined temperature level.

Overall, the DS1836D-10 is an ideal solution for use in a wide range of applications that require precise voltage monitoring, manual reset, and thermal reset features. Its powerful features make it an ideal choice for system designers who require reliable power management and protection from system faults and malfunctions.