DS2890-000+

Series:	--
Packaging:	Bulk
Part Status:	Active
Taper:	Linear
Configuration:	Potentiometer
Number of Circuits:	1
Number of Taps:	256
Resistance (Ohms):	100k
Interface:	1-Wire®
Memory Type:	Volatile
Voltage - Supply:	2.8 V ~ 6 V
Features:	--
Tolerance:	±25%
Temperature Coefficient (Typ):	800 ppm/°C
Resistance - Wiper (Ohms) (Typ):	--
Operating Temperature:	-40°C ~ 85°C
Package / Case:	TO-226-3, TO-92-3 (TO-226AA)
Supplier Device Package:	TO-92-3
Base Part Number:	DS2890

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DS2890-000+ Application Field and Working Principle

Data Acquisition - Digital PotentiometersThe DS2890-000+ is a digital potentiometer that combines features of a non-volatile, programmable, 14-bit rheostat and a 16-bit Digital to Analog Converter (DAC). It is ideal for applications such as digitally controlled attenuation, balancing and regulation, current control, and voltage scaling.The DS2890-000+ is a full CMOS device that is available in an 8-pin SOIC package and has a zero ohm resistance and a fixed wiper resistance. The wiper resistance can be externally set from 1k ohm to 1M ohm and is programmable to any value within this range. Other features include a low on resistance, a wide range of operating temperatures from -40C to +85C, and low current consumption.Since this device is non-volatile, it can be programmed with a control voltage or a serial control protocol for storing the start count, data increment, and the number of cycles. These functions make the device ideal for analog control applications. Furthermore, all logic input and output signals are 5V tolerant and the device is EPROM programmable, so that multiple applications can be stored on one device.The working principle of the DS2890-000+ is based on a linear sliding equalizer, which provides a smooth transition of the resistance value over the entire range of the device. There are two control inputs that are used to select the desired sliding path of the equalizer. The first control input is used to select the starting value and the second control input is used to select the incremental (or decremental) change in resistance with each step.The device also contains a DAC that is used to convert digital values into analog signals. The digital values are input into the device via the logic pins. These logic inputs can be programmed for any logic level or voltage range and the outputs of the DAC are either single-ended (for current-controlled applications) or differential (for voltage-controlled applications).In conclusion, the DS2890-000+ is designed to provide digital control of analog functions. It is ideal for various applications such as current control, voltage scaling, attenuation, and balancing. The device is non-volatile, it has a wide range of operating temperatures, and it is EPROM programmable. The DS2890-000+ is a versatile device that can be used in many different kinds of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description