DS80PCI402SQ/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DS80PCI402SQ/NOPB is a series of Interface & Signal Buffers, Repeaters, Splitters manufactured by Texas Instruments designed for use in applications where high-speed, high-bandwidth serial data signals need to be transmitted without errors and with low jitter.

The DS80PCI402SQ/NOPB is used in applications such as the transmitter and receiver of system clock, or other high data rate signals such as DDR SDRAM or PCI Express signals. It is a dual-channel device and is intended to operate at up to 2.5 gigabaud with low jitter. It has an input voltage range of 0.9V to 3.3V, and is specified to operate over the temperature range of -40 degrees Celsius to +85 degrees Celsius.

The DS80PCI402SQ/NOPB operates as either a transmitter or a receiver, allowing it to work in a variety of applications. In “transmitting” mode, the device takes an input signal and translates it into a serial data stream of up to 2.5 gigabaud, adding jitter elimination, as well as signal adjustments for signal width and duty cycle, allowing for clean data transmission. In “receiving” mode, the device takes an incoming signal and decodes it, recovering the original data stream.

The main working principle of the DS80PCI402SQ/NOPB is the conversion of parallel signals into serial signals and vice versa. While in the transmitter mode, incoming parallel data is converted into a serial data stream, and while in the receiver mode, serial data is converted into parallel signals. The device also contains jitter elimination circuits and signal level adjustment circuitry to ensure accurate, low jitter signal transmission.

As a signal repeater, the device is also able to extend the reach of a data signal system by providing relays between each component involved and along the signal line. This reduces the signal attenuation caused when multiple components are connected in series, allowing the signal to remain clean and free from noise.

The DS80PCI402SQ/NOPB is used in applications such as DVI, HDMI, and DisplayPort, as well as for multiplexing and un-multiplexing signals for signal routing applications, and has been designed for reliability and robustness in signal transmission.

In short, the DS80PCI402SQ/NOPB is an ideal solution for signal transmitting, buffering, and signal repeater applications, helping to ensure high-speed, high-bandwidth signal transmission with low jitter and accurate conversion.

The specific data is subject to PDF, and the above content is for reference