DS90LV048ATM/DRPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DS90LV048ATM/DRPB interface is a kind of transceiver, characterized by its fair level of compatibility with various protocols, as well as its high bit-rate quality. The technology brings many advantages to electronic systems, making it popular in various application fields. In this article, the various application fields of DS90LV048ATM/DRPB, as well as its working principle, will be discussed in greater detail.

Application Field

DS90LV048ATM/DRPB is widely used in Advanced Telecommunications Computing Architecture (ATCA) systems, advanced dataplane-based applications, advanced signal processing, telecom switches, and video processing systems. It is also used to facilitate high speed data acquisition, transmission, and control of different signal types in industrial control, military defense, and automotive systems. Furthermore, the technology is widely found in medical imaging systems and communication protocols.

DS90LV048ATM/DRPB is used primarily for serial embedded interconnects, particularly for simple point-to-point connections. The interface can be used for connecting different embedded systems and micro-attached devices in a single node or board, enabling their communicative ability. Additionally, different nodes can be connected to each other over long distances. This allows for greater scalability and flexibility when used with various protocols and topologies.

In wireline applications, DS90LV048ATM/DRPB is used to interface with high-speed serial datapaths. It can communicate signals between transceivers and receivers, sending serial data in 40-bit blocks at a frequency of up to at least 400 Mbps. In particular, its tight timing discipline, robust hot-plugging, tolerant noise margin, and fast data licensing helps to make it an ideal choice for wireline applications.

It is also used for optical transmission, where the interfaces support multi-mode fiber and single-mode fiber-optic cable. These fiber-optic technology is used in various fields, from medical telecommunications to aviation. DS90LV048ATM/DRPB is used to facilitate communication between the sender and receiver nodes. It also ensures that data is transmitted accurately with minimal to no errors.

Finally, DS90LV048ATM/DRPB is used in LED lighting applications. This type of lighting technology is highly energy efficient and is used in many different settings, including offices, homes, factories, and warehouses. DS90LV048ATM/DRPB is used to control and adjust the brightness of the lights and to enable communication between multiple nodes in a network.

Working Principle

The operating principle of the DS90LV048ATM/DRPB transceiver is based on the High Speed LVDS technology. This technology is based on two types of LVDS electrical signals – the differential shielded control signal (DCS) and the differential unshielded control signal (DUS). The DCS and DUS signals are used to transfer data from one node to another using the low voltage differential signaling (LVDS) protocol.

The DCS and DUS signals can be combined to form a bi-directional, dual-ended signal, which ultimately transmits the 40-bit data packet. Additionally, the transceiver utilizes two separate means of communication – one half-duplex I2C channel and one double duplex LVDS channel. The I2C protocol is used for configuration, control and address processing; whereas, the LVDS protocol is used for data communication. When the DCS and DUS signals are combined, the combined signal is sent to the receiver, where the data is decoded and processed.

The data then proceeds to the device\'s output interface. The output can either be a synchronous interface, such as Pulse Width Modulation (PWM) or pulse position modulation (PPM), or an asynchronous interface, such as Serial Peripheral Interface (SPI) or I2C. The data is then further processed by the receiving node depending on its type and application.

In summary, DS90LV048ATM/DRPB is a high-speed, low-voltage interface transceiver that enables fast data transfer, control and configuration of different digital systems. It is employed in various types of applications, ranging from serial communication to LED lighting, and can be used in point-to-point connections and fiber-optic networks. Its operating principle is based on the LVDS technology and utilizes two types of signals – DCS and DUS – to transmit 40-bit data packets.

The specific data is subject to PDF, and the above content is for reference