DSC2010FI2-B0004T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin configurable/selectable oscillators are basically designed to allow the user to select the output frequency and in some cases the output waveform type that is needed to meet the design requirements of the system. The output frequency of such oscillators can be varied by either using an external voltage control signal or by changing the value of a resistor or capacitor connected to the oscillator’s input. The output waveform type can usually be changed with an on-board switch or pin.The DSC2010FI2-B0004T is a pin-selectable programmable oscillator with a frequency range of 0.5MHz to 48MHz. It has an output voltage of 3.3V and a power dissipation of just 200 mW. The DSC2010FI2-B0004T is designed for applications that require variety of output frequencies and waveforms such as voltage-controlled oscillators (VCOs), pulse-width modulation (PWM) and pulse-frequency modulation (PFM).The DSC2010FI2-B0004T is composed of two sections: an oscillator section and a selectable frequency section. The oscillator section is based on a CMOS integrated-circuit that contains two Clocked Multiplier Modules (CMM) multiplier units and a phase-locked loop (PLL). The frequency of the output signal is determined by the values of two capacitors inside the CMM modules.The selectable frequency section allows the user to select one of the multiple frequencies with the use of on-board selector pins. The selected frequency is further refined with the use of a two pins voltage-controlled oscillator (VCO) that produces a signal with only sub-multiples of the selected frequency to get the exact desired frequency.The DSC2010FI2-B0004T can be used in a variety of application areas that require a precise frequency output. It can be used in clock distribution systems, networking and communication, instrumentation, automotive, industrial control and measurement systems, power electronics, and other applications that require precise timing signals.The DSC2010FI2-B0004T is also excellent for applications that require the selection of more than one frequency. The support for multiple frequencies can be used to improve the flexibility of the system by allowing different output frequencies to be selected and applied depending on the requirements of the application. This makes the device suitable for applications that require a wider range of frequencies to be used.Overall, the DSC2010FI2-B0004T is an ideal solution for applications that require precise, selectable and programmable output frequencies and waveforms. It is designed to be easy to use and to provide a reliable signal, making it an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference