DSC2030FI2-C0001

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable Oscillators have gained widespread acceptance by providing a convenient way of adjusting the oscillator frequency. The DSC2030FI2-C0001 is a selectable oscillator that features a large selection of pin-configurable frequencies and low noise profiles.

The DSC2030FI2-C0001 is designed to offer a wide range of frequencies, from 12 to 200 MHz, in a single package. The oscillator is available in two versions, a two-channel version that allows two separate frequencies to be selected through the same set of control pins, and a single-channel version that offers only one frequency option. The two-channel version is also capable of providing a higher level of frequency accuracy compared to the single-channel version.

The DSC2030FI2-C0001 is a selectable oscillator that uses an on-board EEPROM to store frequency information. Through a series of pins, the user can select which frequency they would like to prescribe to the oscillator. The frequency selection pins are very straightforward and allow users to set the frequency of the oscillator with minimal effort.

The DSC2030FI2-C0001 also features a wide range of operating temperature ranges. The device has an operating temperature range of -20 to 85 °C (0 to 100 °F) and an Extended Temperature Range (ETR) of -40 to 125 °C (-40 to 221 °F). The benefit of this is that it allows the use of the oscillator in applications where temperatures may be extreme.

In terms of applications, the DSC2030FI2-C0001 is widely used in microcontroller applications, RF communication systems, and digital signal processors. The device is very reliable and offers minimal jitter, making it suitable for high-precision systems. The selection of frequencies and extended temperature range makes it suitable for a variety of applications.

The working principle of the DSC2030FI2-C0001 is relatively straightforward, and it relies on a series of digital pins to set the frequency. The digital pins on the device are designed to interact with an on-board EEPROM, which is programmed to store information on frequency selection. Once the frequency selection is selected via the pins, current is allowed to flow through a loop in the oscillator, causing the oscillator to oscillate at the desired frequency.

In conclusion, the DSC2030FI2-C0001 is a selectable oscillator that is used in a variety of applications. The device offers a wide range of frequencies and a reliable operating temperature range, and its frequency selection pins are very intuitive to use. Its working principle is quite simple, relying on an on-board EEPROM to store frequency selection information that is then used to control the oscillator.

The specific data is subject to PDF, and the above content is for reference