DSC2033FI2-G0004T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable Oscillators, such as DSC2033FI2-G0004T, are created for the purpose of generating a stable frequency from an inexpensive method of oscillator. Oscillator is an electrical circuit or device that is used to produce a periodic signal, such as a sine wave, square wave, triangular wave, or any other type of output waveform. It is mostly used for radio communication, timing and measuring, pulsed power supplies, and regulating or controlling an electronic or electromechanical device.

DSC2033FI2-G0004T is a one-time programmable, selectable oscillator that offers frequencies from 8 KHz to 40 MHz with a 0.1% frequency accuracy over the extended temperature range. It has an excellent jitter and stability, low pin count, and minimal size. This oscillator is available in either through-hole or SMD mounting options.

Application Field:

The DSC2033FI2-G0004T is suitable for applications such as digital audio, embedded systems, robotics, aircraft instruments, telecom devices, industrial equipment, automotive systems, and so on.

Working Principle:

The DSC2033FI2-G0004T works by a built-in oscillator IC (Integrated Circuit) which provides an accurate and stable frequency output. It is an integrated chip that features a low-power, low-jitter, CMOS-based oscillator core, along with a set of selectable commands, logic circuitry and support components. The oscillator core makes sure that the device is able to produce the desired output frequency and with the same level of accuracy. The selectable commands help in setting up the device according to the specific needs and requirements of each application. The logic circuitry provides other functions such as status reporting, EMI protection, and so on. The support components provide necessary power for the device to work.

The DSC2033FI2-G0004T operates from a single 5V power supply and can be adjusted in frequency by either one of three methods, depending on the requirements of the application. The first method is to use an external resistor and capacitor to control the circuit\'s frequency, while the second and third methods use an external control voltage and the unit\'s on-board control. The device also offers up to +20dbm of RF output power into a 50 ohm load.

The DSC2033FI2-G0004T is a versatile, pin configurable oscillator that is suitable for many different applications. It provides excellent stability and jitter, low pin count and small size while also supporting up to +20dbm of RF output power into a 50 ohm load.

The specific data is subject to PDF, and the above content is for reference