DSI30-08AC

Diodes, or rectifier components, are used as a type of electrical rectifier, which are mainly used to convert alternating current (AC) to direct current (DC) or vice versa, or isolate devices that would otherwise be affected by AC power. The DSI30-08AC is a single diode designed to rectify both single-phase and three-phase power supply systems from 50 Hz to 400 Hz. The DSI30-08AC has a maximum forward current of 30A with for going power losses of 1.2W at 10A. It has a very low reverse voltage of 1.0V and a maximum operating temperature of 155°C. It also has a built-in temperature sensor which can be monitored by a thermistor. It also has an external inductor for higher power efficiency. The DSI30-08AC is used in a wide range of applications including:- Power supply systems, such as servers, UPSs, and high power density rectifiers- Alternating current (AC) motor drives - Battery charging systems- Electro-mechanical power convertersIt is also used in solar power converters, LED lighting systems, and motor control applications. It is important to note that the DSI30-08AC rectifier is only suitable for voltages with a frequency of 50Hz up to 400Hz, and should not be used for voltages of different frequency. It cannot be used for a voltage of 300V DC or greater. The DSI30-08AC rectifier operates on the principle of Ohm\'s Law, which states that the current flowing through a conductor is directly proportional to the voltage applied across the conductor. As the voltage increases, the current through the device increases as well. This relationship is linear, meaning that a doubling of the voltage will result in a doubling of the current. In operation, the DSI30-08AC rectifier converts alternating current (AC) to direct current (DC). This is done by allowing current to flow in one direction through the device during each half cycle of the AC input. When the AC input is high, electrons will flow through the diode, creating a voltage drop of around 0.7V. This voltage drop prevents current from flowing the opposite direction. The working of the device is simple, and is done with the help of two diodes. The two diodes are connected in an anti-parallel orientation. During the half-cycle of the AC power supply, the anode of one diode is positively charged, while the anode of the other diode is remained negatively charged. Consequently, this helps in allowing only one-way current flow through the device, converting the AC current to DC current. In conclusion, the DSI30-08AC is a single diode designed to rectify both single-phase and three-phase power supply systems from 50 Hz to 400 Hz. It is used in a wide range of applications including power supply systems, battery charging systems, electro-mechanical power converters, solar power converters, LED lighting systems and motor control applications. It works according to the principle of Ohm\'s law, converting alternating current (AC) to direct current (DC).

DSI30-08A	IXYS	1.38 $	2636	DIODE GEN PURP 800V 30A T...
DSI30-16A	IXYS	1.6 $	398	DIODE GEN PURP 1.6KV 30A ...
DSI30-12A	IXYS	--	1000	DIODE GEN PURP 1.2KV 30A ...
DSI30-12AS-TUB	IXYS	1.82 $	38	DIODE GEN PURP 1.2KV 30A ...
DSI30-16AS-TUB	IXYS	1.96 $	599	DIODE GEN PURP 1.6KV 30A ...
DSI35-08A	IXYS	10.09 $	1000	DIODE GEN PURP 800V 49A D...
DSI30-08AS-TUB	IXYS	1.4 $	1000	DIODE GEN PURP 800V 30A T...
DSI30-16AS-TUBE	IXYS	1.62 $	1000	DIODE GEN PURP 1.6KV 30A ...
DSI35-12A	IXYS	10.58 $	1000	DIODE AVALANCHE 1.2KV 49A...
DSI30-08AS	IXYS	--	1600	DIODE GEN PURP 800V 30A T...
DSI30-12AS	IXYS	0.83 $	5600	DIODE GEN PURP 1.2KV 30A ...
DSI30-16AS	IXYS	--	800	DIODE GEN PURP 1.6KV 30A ...
DSI30-08AC	IXYS	1.53 $	1000	DIODE GP 800V 30A ISOPLUS...
DSI30-12AC	IXYS	2.86 $	1000	DIODE GP 1.2KV 30A ISOPLU...