DSPIC30F4013-30I/PT

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. High-Performance Modified RISC CPU

    1. Modified Harvard Architecture

    2. C Compiler Optimized Instruction Set Architecture

    3. Flexible Addressing modes

    4. 83 Base Instructions

    5. 24-Bit Wide Instructions, 16-Bit Wide Data Path

    6. Up to 48 Kbytes On-Chip Flash Program Space

    7. 2 Kbytes of On-Chip Data RAM

    8. 1 Kbyte of Nonvolatile Data EEPROM

    9. 16 x 16-Bit Working Register Array

  10. Up to 30 MIPS Operation:

        - DC to 40 MHz External Clock Input

        - 4 MHz-10 MHz Oscillator Input with PLL Active (4x, 8x, 16x)

  11. Up to 33 Interrupt Sources:

        - 8 user-selectable priority levels

        - 3 external interrupt sources

        - 4 processor traps

2. DSP Features

    1. Dual Data Fetch

    2. Modulo and Bit-Reversed modes

    3. Two 40-Bit Wide Accumulators with Optional saturation Logic

    4. 17-Bit x 17-Bit Single-Cycle Hardware Fractional/Integer Multiplier

    5. All DSP Instructions are Single Cycle

        - Multiply-Accumulate (MAC) Operation

    6. Single-Cycle ±16 Shift

3. Peripheral Features

    1. High-Current Sink/Source I/O Pins: 25 mA/25 mA

    2. Up to Five 16-Bit Timers/Counters; Optionally Pair Up 16-Bit Timers into 32-Bit Timer modules

    3. Up to Four 16-Bit Capture Input Functions

    4. Up to Four 16-Bit Compare/PWM Output Functions

    5. Data Converter Interface (DCI) Supports Common Audio Codec Protocols, Including I2S and AC’97

    6. 3-Wire SPI module (supports 4 Frame modes)

    7. I2C™ module Supports Multi-Master/Slave mode and 7-Bit/10-Bit Addressing

    8. Up to Two Addressable UART modules with FIFO Buffers

    9. CAN bus module Compliant with CAN 2.0B Standard

4. Analog Features

    1. 12-Bit Analog-to-Digital Converter (ADC) with:

        - 200 ksps conversion rate

        - Up to 13 input channels

        - Conversion available during Sleep and Idle

    2. Programmable Low-Voltage Detection (PLVD)

    3. Programmable Brown-out Reset

5. Special Microcontroller Features

    1. Enhanced Flash Program Memory:

        - 10,000 erase/write cycle (min.) for industrial temperature range, 100K (typical)

    2. Data EEPROM Memory:

        - 100,000 erase/write cycle (min.) for industrial temperature range, 1M (typical)

    3. Self-Reprogrammable under Software Control

    4. Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)

    5. Flexible Watchdog Timer (WDT) with On-Chip Low-Power RC Oscillator for Reliable Operation

    6. Fail-Safe Clock Monitor Operation:

        - Detects clock failure and switches to on-chip low-power RC oscillator

    7. Programmable Code Protection

    8. In-Circuit Serial Programming™ (ICSP™)

    9. Selectable Power Management modes:

        - Sleep, Idle and Alternate Clock modes

6. CMOS Technology

    1. Low-Power, High-Speed Flash Technology

    2. Wide Operating Voltage Range (2.5V to 5.5V)

    3. Industrial and Extended Temperature Ranges

    4. Low-Power Consumption