DSPIC30F6012-30I/PF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DSPIC30F6012-30I/PF is an 8-bit digital signal controller (DSC) in the PIC family of microcontrollers with the integration of an on-board set of digital signal processing (DSP) instructions. The DSPIC30F6012-30I/PF has an on-board 16-bit wide instruction bus and can execute instructions in single-cycle execution modes, providing more program execution efficiency. The DSPIC30F6012-30I/PF features integrated peripherals such as 8 channels of 10-bit Analog-to-Digital conversion, two networks of switching architecture, two Capture/Compare modules, one Enhanced Capture module, a Phase-Locked-Loop (PLL), four USART modules, three Synchronous Serial Port (SSP) modules, two I2C modules, two buffered parallel ports, two Motor Control PWM modules, a Fractional-N PLL, and a 10-Bit Digital-to-Analog Converter (DAC) module.

With these highly integrated peripherals, this microcontroller is suitable for a wide range of application fields, including industrial motor control, factory automation, robotics, audio/video applications, gaming and telecommunication systems, etc. This board also offers free line drivers, general-purpose calculators, hardware implementation of FFT, and much more. For example, in the field of motor control applications, the DSPIC30F6012-30I/PF can be used to control motor speed and position through a variety of feedback methods. The ability to execute arithmetic operations such as multiplication, division, and square root gives the DSPIC30F6012-30I/PF an edge over other 8086-based microcontrollers when it comes to embedded applications that require high application performance.

In addition to its application fields, the DSPIC30F6012-30I/PF is also known for its working principle, where the microcontroller utilizes several features to accomplish the required tasks. The DSPIC30F6012-30I/PF features a traditional Von Neumann architecture, which allows instructions to be executed sequentially and faster than other RISC- orCISC-based microcontrollers. The instruction data is stored in a tightly coupled program memory, while the data itself is stored in a separate data memory. The instruction bus width is 16 bits, which is flexible enough to accommodate all instructions, and can be configured to use multiple clock cycles. This also enables the processor to execute multiple instructions in a single cycle, thereby increasing throughput.

The DSPIC30F6012-30I/PF also features two key features that enhance its performance: power management and clock scaling. Power management helps the memory to conserve power by reducing the clock frequency or voltage when the device is idle. Clock scaling allows the clock frequency to be changed depending on the application’s needs, allowing the user to optimize system performance.

The DSPIC30F6012-30I/PF has a wide range of application fields and is useful in practical applications due to its advanced features and working principle. With its integrated peripherals, the microcontroller can be used in a variety of applications, and its power management and clock scaling features enable it to perform well in such applications. As a result, the DSPIC30F6012-30I/PF is an ideal microcontroller for embedded applications that require superior performance and reliability.

The specific data is subject to PDF, and the above content is for reference