DSSE10(AB)AC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Snap action, Limit switches, such as DSSE10(AB)AC, are electromechanical devices that are used for a variety of industrial, commercial and other applications. They are generally used to control a circuit when an event, such as a pressure change or temperature change, occurs. In order to achieve this, the switch must be able to open and close without fail.

A snap action, Limit switch is composed of several mechanical components. At its heart is the lever and its associated spring. The lever is typically connected to an actuator, such as a button or a dial, which in turn can be connected to a circuit via a lead or wire. When the switch is activated, the actuator causes the lever to move, compressing or releasing the spring. This action causes the contacts on either side of the switch to open or close and thus turn the circuit on or off.

The DSSE10(AB)AC is a common type of snap action, Limit switch used in various industrial and commercial applications. It is constructed of a molded, impact-resistant and corrosion protected epoxy enclosure combined with a robust top and bottom closure for total environmental protection. The DSSE10(AB)AC has a double pole, double throw (DPDT) contact arrangement, two contact blocks insertable into the housing, and two ejectable platforms. This design allows it to be used in applications such as pressure, temperature, and flow sensing, where it can detect a wide variety of potential changes in the environment.

The DSSE10(AB)AC\'s working principle involves a combination of mechanical and electrical action. As stated above, the switch is composed of mechanical components, including the lever and spring which act as a threshold when activated. When the pressure, temperature or flow change within the environment is sufficient, the lever will move, causing the spring to compress and release, opening and closing the circuit, respectively. The electrical action of the DSSE10(AB)AC is generated in response to the mechanical action of the lever, causing a change in the voltage from a low to a high level, which then causes the contacts to open or close depending on the switch\'s configuration.

The DSSE10(AB)AC is a versatile and dependable snap action, Limit switch that can be used in a variety of industrial, commercial and other applications. It features a robust design and dependable operation, making it ideal for use in high-temperature, wet or corrosive environments. It is also designed to provide reliable and repeatable switching action with excellent long-term operation and high electrical power rating capabilities, making it an ideal choice when tight control and accuracy of switching action is required.

The specific data is subject to PDF, and the above content is for reference