Allicdata Part #: | 1864-1121-ND |
Manufacturer Part#: |
DUA52C724 |
Price: | $ 88.70 |
Product Category: | Industrial Controls |
Manufacturer: | Carlo Gavazzi Inc. |
Short Description: | RELAY MONITOR UNDER VOLT 8-28DC |
More Detail: | N/A |
DataSheet: | DUA52C724 Datasheet/PDF |
Quantity: | 12 |
1 +: | $ 80.64000 |
Series: | DUA52 |
Part Status: | Active |
Type: | Voltage Sensing DC |
Trip Status: | Energized High |
Trip Range: | 8 ~ 28V DC |
Delay Time: | -- |
Voltage - Supply: | 12 ~ 24VDC |
Output Type: | Relay |
Circuit: | SPDT (1 Form C) |
Contact Rating @ Voltage: | 5A @ 250VAC |
Mounting Type: | DIN Rail |
Operating Temperature: | -20°C ~ 60°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DUA52C724 is a multifunction digital monitor that is designed to measure Current, Voltage, and Relay Outputs. This device is useful for applications where precise monitoring and control is required. With its ability to monitor and measure current and voltage with a variety of ranges, this is an ideal solution for many industrial settings.
The working principle of the DUA52C724 is to measure and convert the analog signals generated by the current or voltage sensors into a digital signal. This signal is then output to either an analog or digital display, or to a control circuit. The analog output can be used to provide feedback to the control circuit if the monitored current or voltage is higher or lower than the set point, or to activate a switch to activate or deactivate a circuit. The digital output can be used to trigger a relay or other device.
The most common application of the DUA52C724 is in motor control applications. It is often used to detect over-current and under-current conditions which can occur due to thermal overloads, incorrect wiring of the motor, or other faults. The device is also useful in the protection against over-voltage and under-voltage conditions, which can be caused by faults in the power supply or fluctuation in the voltage. The relay output can be used to interrupt the power supply or to interrupt the current flow.
Another common application is the monitoring of HVAC (heat, ventilation, and air conditioning) systems. The DUA52C724 can be used to detect and monitor the temperature of the air and the pressure of the water flow. The relay output can be used to automatically shut down the system when the temperature and/or pressure exceed a certain level.
The DUA52C724 is also suitable for AC motor control applications, where accurate speed, torque, and RPM monitoring and control is required. The analog output can be used to detect over-current and under-load conditions, while the digital output can be used to monitor the RPM and to trigger a relay for speed control.
The DUA52C724 is also used in industrial sensors used to monitor temperatures, pressures, and other physical conditions. The analog input can be used to detect a change in temperature or pressure and the digital output can be used to activate a switch, for example, to trigger a cooling fan or a heating element.
In conclusion, the DUA52C724 is an ideal solution for a variety of industrial applications where precise current, voltage, and relay output monitoring and control is required. Its capability to measure different ranges of current and voltage, as well as its relay output, make it an ideal choice for motor control, HVAC systems, and industrial sensors.
The specific data is subject to PDF, and the above content is for reference
CURRENT SWITCH 5-50A
21-890=WILMAR POWER MONITOR
RELAY CUR SENSE 24VDC 5-5A
REL AC GROUND FAULT SENS 120VAC
3-PHASE OVER/UNDER VOLT RLY
TACH RLY 300 RPM 115V