DZ2J18000L Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electrical components in an electrical circuit which allow the flow of electricity in one direction only. One type of diode is the Zener diode, which is designed to take advantage of the "Zener effect" in certain materials that allow a reverse-biased diode to conduct in the reverse direction. The DZ2J18000L is a single Zener diode specifically designed for very low current applications and has a breakdown voltage of 18V.

The DZ2J18000L belongs to the general class of Zener diodes, so its basic structure is similar. It is a two terminal, semiconductor device, consisting of a PN junction, typically composed of Silicon and other materials, as well as an oxide or PN-junction isolation layer, as a way to enhance the breakdown voltage and current capability. The diode must have a correctly sized and rated housing and be properly installed, so as to protect it from excessive heat, moisture, shock, etc.

The principle of operation of the DZ2J18000L is based on the voltage-controlled current flow through the reverse-biased PN junction. When the reverse bias applied to the PN junction exceeds a certain level, known as the Zener breakdown voltage, the Zener effect begins and current begins to flow. This same principle applies to all types of Zener diodes. In the case of the DZ2J18000L, the Zener breakdown voltage is 18V.

The DZ2J18000L is used in a variety of applications, including voltage regulation, overvoltage protection, current regulation, surge protection and oscillator timing circuits. It can also be used in low power/battery operated circuits, as well as high voltage switching circuits. In terms of voltage regulation, the diode acts as a voltage reference, allowing a given voltage (in this case, 18V) to be held steady, regardless of the applied load or input voltage.

The DZ2J18000L is also widely used in overvoltage protection circuits. In this application, the diode prevents any voltages above the specified breakdown voltage from entering the circuit. If a voltage higher than the breakdown voltage is applied to the circuit, the diode will immediately begin to conduct (when the Zener condition is met) and reservoir the energy, dissipating it as heat. This can help protect other components in the circuit from damage due to excessive voltages.

The DZ2J18000L can also be used in current regulation circuits. In this application, the diode drops a certain amount of voltage, allowing a lower voltage than the input voltage to be supplied to the load, resulting in a lower current draw. This can be used to protect the load from excessive currents or to control the current to the load for optimal performance.

Finally, the DZ2J18000L can be used in surge protection circuits. In this application, the diode takes advantage of the Zener reverse breakdown voltage in order to shunt high voltages or current spikes away from the rest of the circuit. When a high voltage or current spike appears, the diode will conduct and dissipate that energy as heat, thus protecting the other components in the circuit.

In conclusion, the DZ2J18000L is a single Zener diode that can be used in a variety of applications, including voltage regulation, overvoltage protection, current regulation, surge protection, and oscillator timing circuits. It works by taking advantage of the Zener effect, which results in a current flow through the reverse-biased PN junction when the applied voltage exceeds a certain threshold. This particular diode has a Zener breakdown voltage of 18V, making it an ideal choice for low-power and battery-operated circuitry.

The specific data is subject to PDF, and the above content is for reference