DZ2J06800L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DZ2J06800L is a state-of-the-art diode in the single-zener category. It is designed for applications that involve precision voltage regulation and/or voltage protection in a variety of rising, falling and transient conditions.

The DZ2J06800L is a silicon based diode, with a Zener breakdown voltage range of 6.8V. It is designed to control both forward and reverse voltages. It offers a very low leakage current and is capable of operating in temperature ranges from -40C to +125C. Its maximum Zener power rating is 500mW.

The main application field and working principle of the DZ2J06800L is mainly focused on voltage regulation, current regulation and/or transient protection.

At normal operating conditions, the DZ2J06800L acts as a normal diode allowing current to flow through it in one direction. The Zener breakdown voltage is set at 6.8V, so any voltage exceeding this will cause the diode to break down, creating a voltage and current regulated state thus creating a voltage stabilized level.

The process of Zener breakdown requires an excessive amount of reverse voltage to be applied to a diode after which the diode will rapidly switch to a low-impedance and a low-leakage state. This prevents the current from increasing further after the breakdown voltage is exceeded. In the case of the DZ2J06800L diode, the reverse voltage is limited to 6.8V, thus creating a stable output voltage, while also limiting the current drawn.

In addition to its standard Zener breakdown application, the DZ2J06800L can also be used for voltage protection, current regulation and transient protection. When connected in series, the DZ2J06800L diode can be used for over-voltage, over-current and short-circuit protection. In its voltage protection application, it can be used to limit the voltage going into an electronic circuit, thus protecting it from over-voltage damage. The DZ2J06800L diode can also be used for current regulation where the current drawn by a circuit is limited to a predetermined level. Finally, it can be used for transient protection, where it can help limit any rapid voltage spikes. The diode can also help protect against over-voltage and over-current damage during periods of power surges.

In conclusion, the DZ2J06800L is a versatile single zener diode that can be used in a variety of applications ranging from voltage regulation and voltage protection to current regulation and transient protection. Its main application field and working principle revolves around controlling both forward and reverse voltages, as well as helping to stabilize and protect circuits from avalanche, over-voltage and over-current damage in a variety of rising, falling and transient situations.

The specific data is subject to PDF, and the above content is for reference