ECA-1CM100I Capacitors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are an important type of capacitor used in many electrical and electronic systems. They consist of two aluminium foils, between which an aluminium oxide film is inserted. One of the foils is usually a solid sheet whilst the other is a rolled sheet. They are ideal for applications needing high capacitance in a small package size and low cost. These capacitors are typically used in power supplies and other circuits that need high reliability and low ESR (Equivalent Series Resistance).

The ECA-1CM100I is an aluminum electrolytic capacitor from Panasonic. It is a surface-mount type device with a case size of 5.2mm x 3.2mm and a small case height of 1.25mm. The device has a large capacitance range of 1uF to 47uF, making it suitable for a variety of applications. The device has a rated voltage range of 6.3V to 16V, and a temperature range of -55˚C to +85˚C.

The device also features a high ESR of just 0.009 ohms and a high ripple current of 1070mA. This makes it well-suited for power supply and noise-filtering applications. The device also features a high durability rating of 90 thousand hours, which makes it more reliable than many other types of electrolytic capacitors. The device also has an endurance rating of 1000 hrs, which is higher than many other comparable electrolytic capacitors. Additionally, it meets most international safety standards including EIA-456 and IEC 62368.

The ECA-1CM100I is primarily used in low-voltage power supply applications such as digital cameras, mobile phones and other portable electronics. It is also used in filters, noise elimination and power supply smoothing. Its ability to handle high temperatures and its high ripple current rating makes it particularly suited for these applications. Its high capacitance range and low ESR also make it well-suited for noise suppression, power supply and motor drive applications.

The ECA-1CM100I is made up of two electrodes, a cathode and an anode. The cathode is made up of an aluminium foil which is etched to create a large surface area for increased capacitance. The anode is made up of a thin sheet of aluminium. When the capacitor is connected to a voltage source, an electric charge flows from the cathode to the anode which forms a layer of an aluminium oxide film between the two electrodes. This layer performs the role of the dielectric in a capacitor, providing the necessary electrical insulation between the two electrodes and thus increasing the capacitor’s capacitance.

The ECA-1CM100I is a highly reliable and efficient aluminum electrolytic capacitor which is suitable for a wide range of electrical and electronic applications. It is ideal for use in low-voltage power supplies, filters, and noise elimination and power supply smoothing. Its large capacitance range, low ESR and high ripple current make it well suited for these applications. Additionally, its high temperature and endurance ratings make it more reliable than many other types of electrolytic capacitors.

The specific data is subject to PDF, and the above content is for reference