ECA-2AHG4R7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors, or ECA-2AHG4R7, are a category of components within the realm of capacitors. Capacitors are one of the most widely used components within electronics and have a variety of uses. The ECA-2AHG4R7 is specifically designed for use as a low-impulse, low cost and long life alternative to other types. These capacitors are ideal for use in situations where isolation and reliability is of utmost importance, and where the cost of components should be minimized while still providing good performance. This article will discuss the uses and working principles of an ECA-2AHG4R7.

An ECA-2AHG4R7 is an aluminum electrolytic (AlEl) capacitor, a type of non-polarized capacitor that uses a thin oxide layer on aluminum as the dielectric. The oxide layer is formed when oxide ions are exchanged between the aluminum and an electrolyte, resulting in an oxide layer that is highly stable and resistant to changes in voltage. This oxide layer enables the capacitor to have a much higher capacitance rating than other commonly used capacitors.

The capacitance of the ECA-2AHG4R7 is relatively high, with ratings ranging from 10μF to 100μF. This makes them suitable for use in power-supply, lighting and filtering circuits, as well as other electronic circuits that require a reliable electrical storage device. Additionally, the ECA-2AHG4R7 is also resistant to temperature and moisture, making them well suited for outdoor applications as well.

The most common application for an ECA-2AHG4R7 capacitor is as a voltage-doubling device. This is because the two leads of the capacitor are connected to the same voltage, causing the capacitor to double the voltage across itself. This type of operation enables the capacitor to deliver higher voltage than is available from the power supply, making it a useful tool in powering circuits. Additionally, it can also be used to smooth AC power, as the capacitor can store and then release energy at an even rate.

Because the ECA-2AHG4R7 is an AlEl type capacitor where two polarities are not required, it can easily be used in circuits where there is only a single voltage. This is made even easier by the fact the capacitor has a self-healing property, which allows it to repair itself in the event of electrical damage. This not only makes it reliable in operation, but also minimizes the cost of routine maintenance.

While the ECA-2AHG4R7 is primarily used as a voltage-doubling device, it can also be used in other applications. Its high capacitance rating makes it suitable for use as a filtering device, where it can reduce or eliminate noise and interference in electrical circuits. It is also used as a resonator in HF (high frequency) radio circuits, where the rapid charge and discharge characteristics of the capacitor is used to create a resonant frequency. Additionally, they can also be used as voltage regulators, where they are used in conjunction with resistors to reduce the voltage in a circuit.

The ECA-2AHG4R7 has two leads, which are connected to the two ends of the capacitor. The positive lead is then connected to a terminal connected to a power supply, and the negative lead is connected to a terminal connected to ground. When a voltage is applied across the capacitor, an electric field is created between the two electrodes, causing a flow of current. This current causes charge to accumulate on the electrodes, resulting in a stored electrical charge. When the voltage across the capacitor changes, the electric field changes too and the charge stored on the capacitors also changes, resulting in a change in current through the capacitor.

In summary, the aluminum electrolytic ECA-2AHG4R7 is an incredibly useful capacitor suitable for use in a variety of applications. Its low cost, long life and stable performance make it an excellent choice for applications where isolation and reliability are essential. It is also resistant to temperature and moisture, making it suitable for use in outdoor applications as well. Moreover, the fact that it has a self-healing property minimizes the cost of maintenance.

The specific data is subject to PDF, and the above content is for reference