ECE-A1HKS100B Capacitors |
|
Allicdata Part #: | P19588TB-ND |
Manufacturer Part#: |
ECE-A1HKS100B |
Price: | $ 0.03 |
Product Category: | Capacitors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | CAP ALUM 10UF 20% 50V RADIAL |
More Detail: | 10µF 50V Aluminum Electrolytic Capacitors Radial, ... |
DataSheet: | ECE-A1HKS100B Datasheet/PDF |
Quantity: | 2000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
2000 +: | $ 0.02722 |
4000 +: | $ 0.02518 |
10000 +: | $ 0.02381 |
14000 +: | $ 0.02259 |
50000 +: | $ 0.02041 |
100000 +: | $ 0.01803 |
Series: | KS |
Packaging: | Tape & Box (TB) |
Lead Free Status / RoHS Status: | -- |
Part Status: | Active |
Moisture Sensitivity Level (MSL): | -- |
Capacitance: | 10µF |
Tolerance: | ±20% |
Voltage - Rated: | 50V |
ESR (Equivalent Series Resistance): | -- |
Lifetime @ Temp.: | 1000 Hrs @ 85°C |
Operating Temperature: | -40°C ~ 85°C |
Polarization: | Polar |
Ratings: | -- |
Applications: | General Purpose |
Ripple Current @ Low Frequency: | 35mA @ 120Hz |
Lead Spacing: | 0.197" (5.00mm) |
Size / Dimension: | 0.248" Dia (6.30mm) |
Height - Seated (Max): | 0.197" (5.00mm) |
Surface Mount Land Size: | -- |
Mounting Type: | Through Hole |
Package / Case: | Radial, Can |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Aluminum Electrolytic Capacitors are used for general-purpose applications, ranging from the most demanding applications such as power factor correction to the more relaxed uses such as storing data during a power interruption. However, one of the most prominent applications of Aluminum Electrolytic Capacitors is the ECE-A1HKS100B. The capacitance of the ECE-A1HKS100B is 100μF and its rated voltage is 35 VDC, which makes it suitable for use in a variety of applications.
The ECE-A1HKS100B works on the basic principle of electrolytic capacitors, which requires a wet or a liquid solution to act as the electrolytic medium between two conducting surfaces. The anode of the capacitor is Aluminum foil. The cathode is also Aluminum foil coated with manganese dioxide (MN02). The two Aluminum foils are connected via a double-layer electrolytic medium, which works to reduce the leakage current. The electrolyte usually consists of a mixture of organic and inorganic electrolytes, which is held between the two foils. This electrolyte is further protected by an insulating sleeve, which also forms the valve for the release of gases released.
The ECE-A1HKS100B is an important component for applications where the voltage, current and temperature must be carefully balanced. One of the main applications of the ECE-A1HKS100B is in power supplies, where the voltage, current and temperature must be managed and regulated. In power supplies, the voltage and current can be regulated with the help of a voltage regulator, while the temperature is managed with the help of a cooling fan. Furthermore, the ECE-A1HKS100B is also used in amplifiers, circuit protectors, voltage regulators, and batteries.
The ECE-A1HKS100B is also used in circuit boards and general-purpose circuits. It is the ideal choice for a stable power supply in applications, which require a low reactance over a wide range of electric, optical and digital signal frequencies. Additionally, the capacitance of the ECE-A1HKS100B is 100μF, which makes it suitable for a wide range of uses, including in power supplies, amplifiers, voltage regulators, circuit protectors, and batteries.
Due to its wide use in power electronics, it is very important to carefully monitor the temperature of the device. The temperature must be kept below the maximum temperature rating to ensure the safety of the component, as well as the system. Heat is a major enemy of capacitors, so proper cooling is essential. Heat sinks, fans and other cooling systems can be used to keep the component cool, but it is also important to ensure that no moisture enters the component to cause corrosion.
ECE-A1HKS100B is a reliable product that has an excellent performance in many applications. Its low leakage current and low temperature rise mean it is an ideal choice for applications where voltage, current and temperature need to be regulated and managed accurately. It has an impressive range of voltages, currents and capacitances, making it suitable for a wide range of applications, from power factor correction to general-purpose uses. Additionally, its robust construction and good reliability make it a dependable and cost-effective choice for any application.
The specific data is subject to PDF, and the above content is for reference
CAP ALUM 33UF SMD33F 400V Aluminum Elect...
CAP ALUM 33UF SMD33F 400V Aluminum Elect...
CAP ALUM 68UF SMD68F 250V Aluminum Elect...
CAP ALUM 68UF SMD68F 250V Aluminum Elect...
CAP ALUM 100UF SMD100F 200V Aluminum Ele...
CAP ALUM 100UF SMD100F 200V Aluminum Ele...