ECE-P2GA152HA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are an important type of passive component, widely used in computers, power supplies, consumer electronics, and other electronic circuits. The ECE-P2GA152HA Aluminum Electrolytic Capacitor is an electrolytic capacitance specifically designed for use in various power supply, switching power supply and communication signal filtering applications. This capacitor is a polarized component, meaning that the DC voltage applied to the capacitor must be greater than the working voltage rating but must not exceed the maximum rated voltage.

The ECE-P2GA152HA Aluminum Electrolytic Capacitor has a capacitance value of 152H, and is designed to work in wide temperature range from -40°C to +85°C. It has an operating temperature of +105°C and can handle high ripple currents up to 400mΩ. The capacitor’s operating frequency response is 100kHz, and its maximum allowable capacitance is 1,000WV, which is relatively high.

The ECE-P2GA152HA Aluminum Electrolytic Capacitor is usually constructed of three layers: a cathode on one side, an anode on the other side, and an electrolyte in between. The electrodes act as electrodes, carrying current between them, while the electrolyte provides a medium for current flow and also acts as an insulation material. When a positive voltage is applied to the cathode side of the capacitor, ions from the electrolyte are attracted to the anode side, thus separating the copper electrodes. This action stores energy in the capacitor, and the stored energy can be released in a reversed current.

The capacitor’s working principle relies on the movement of charge carriers within a capacitor. When a voltage is applied to the component, the capacitor’s electrical field will be created, causing the free electrons to move from lower to higher points of electric potential. This movement of charge carriers is known as Faraday\'s law of induction. As the amount of charge flowing through the capacitor increases, the current through the capacitor also increases, increasing the capacitance.

The ECE-P2GA152HA Aluminum Electrolytic Capacitor is a high-performance capacitor that has been specifically designed for various power supply, switching power supply and communication signal filtering applications. It has a wide temperature range and is able to handle high ripple currents, allowing it to be used in many different applications where other traditional aluminum capacitors may not perform as well. Its maximum capacitance of 1000WV is relatively high and its operating frequency response of 100kHz make it an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference