ECO-S1CA822AA

Polarization:	Polar
Package / Case:	Radial, Can - Snap-In
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.457" (37.00mm)
Size / Dimension:	0.787" Dia (20.00mm)
Lead Spacing:	0.394" (10.00mm)
Ripple Current @ High Frequency:	2.76A @ 100kHz
Ripple Current @ Low Frequency:	2.4A @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	TS-HA
Operating Temperature:	-40°C ~ 105°C
Lifetime @ Temp.:	3000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	71 mOhm @ 120Hz
Voltage - Rated:	16V
Tolerance:	±20%
Capacitance:	8200µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

, <p>Aluminum electrolytic capacitors are widely applied in the field of electric circuit, including the power supply, filtering, storing and recovering of voltage, as well as frequency and surge current compensation. ECO-S1CA822AA aluminum electrolytic capacitors is one of the representative product in this category.</p><p>ECO-S1CA822AA is characterized by its high reliability, low impedance, compact size, and large capacity. Components of this type can be used in high current and low voltage circuits and are often used to filter interference for signal processing, or compensation peaks and sharp changes in voltage. It is easily mounted on the printed circuit board without taking up lots of space, and helps to simplify the circuit by avoiding bulky external inductance components.</p><p>A typical ECO-S1CA822AA aluminum electrolytic capacitor consists of an etched anode, a spacer made of a tantalum foam or a ceramic frame, and a rolled piece of aluminum or tantalum foil acting as the cathode. Each of these components is then immersed in an electrolytic solution.</p><p>When in use, an ECO-S1CA822AA aluminum electrolytic capacitor takes in electrical current from the wires leading to its terminals. This current causes ions to release from the electrolytic solution onto the anode and cathode. The ions become positively charged, while the wire leads become negatively charged. This creates a potential difference between the leads of the capacitor, allowing current to flow between them. As electrons move through the capacitor they are able to store energy and act as a filter for electric signals.</p><p>The ECO-S1CA822AA aluminum electrolytic capacitor is also capable of storing charge for longer periods than ceramic capacitors and is used in applications such as audio, video, power supply filtering, computer logic, clock and timing circuits, lightning surge protectors, and RF amplifiers.</p> <p>Due to its low impedance, ECO-S1CA822AA aluminum electrolytic capacitor is able to respond quickly to peak loads in circuits, as well as increase the working lifetime of the circuit due to its higher capacity. This makes it an ideal choice for a variety of electronic circuits.</p><p>Its advantages are not only limited to the technical aspects. The ECO-S1CA822AA aluminum electrolytic capacitor is also easier to maintain due to its lighter weight and compact size. Also, the production cost is lower compared to other types of capacitor, making it one of the most cost-effective choice for electric circuit designers.</p><p>In conclusion, the combination of high quality, high capacity, low price and wide application fields makes the ECO-S1CA822AA aluminum electrolytic capacitor a popular choice for circuit designers.</p>

The specific data is subject to PDF, and the above content is for reference