Allicdata Part #: | P6672-ND |
Manufacturer Part#: |
ECO-S1HA182AA |
Price: | $ 0.00 |
Product Category: | Capacitors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | CAP ALUM 1800UF 20% 50V SNAP |
More Detail: | 1800µF 50V Aluminum Electrolytic Capacitors Radial... |
DataSheet: | ECO-S1HA182AA Datasheet/PDF |
Quantity: | 1000 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Contains lead / RoHS non-compliant |
1 +: | 0.00000 |
Specifications
Polarization: | Polar |
Package / Case: | Radial, Can - Snap-In |
Mounting Type: | Through Hole |
Surface Mount Land Size: | -- |
Height - Seated (Max): | 1.260" (32.00mm) |
Size / Dimension: | 0.787" Dia (20.00mm) |
Lead Spacing: | 0.394" (10.00mm) |
Ripple Current @ High Frequency: | 1.73A @ 100kHz |
Ripple Current @ Low Frequency: | 1.5A @ 120Hz |
Applications: | General Purpose |
Ratings: | -- |
Series: | TS-HA |
Operating Temperature: | -40°C ~ 105°C |
Lifetime @ Temp.: | 3000 Hrs @ 105°C |
ESR (Equivalent Series Resistance): | 129 mOhm @ 120Hz |
Voltage - Rated: | 50V |
Tolerance: | ±20% |
Capacitance: | 1800µF |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Obsolete |
Lead Free Status / RoHS Status: | -- |
Packaging: | Bulk |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Aluminum Electrolytic CapacitorsAluminum electrolytic capacitors are a type of capacitor that uses a layer of anodized aluminum as its primary element. This type of capacitor is preferred when large capacitance values are needed. The layer of anodized aluminum increases the electrostatic capacity, allowing the capacitor to hold a larger charge than other types of capacitors. The most common applications for aluminum electrolytic capacitors include power supplies, audio systems, and telecommunications.The ECO-S1HA182AA, in particular, is an aluminum electrolytic capacitor. This particular capacitor is a radial-leaded, non-polarized electrolytic capacitor with a rated operating temperature of -55 °C to +105 °C. It has a rated capacitance of 2200μF, a rated voltage of 16V, and a maximum allowable ripple current capacity of 3.2A at 105 °C. The product also has a maximum operating voltage of 25V, and is Class B approved per UL 1994, UL 60384, and CSA E60384 standards.The most important feature of this capacitor is its high ripple current capacity. Its low voltage, 16V, is ideal for applications that do not require a higher rated voltage, such as power supplies, and its extended temperature range makes it suitable for a variety of applications. In addition, this capacitor’s non-polarity allows it to be used in circuits where extra safety or protection is required, resulting in improved reliability and better performance.The ECO-S1HA182AA’s working principle is essentially the same for all aluminum electrolytic capacitors. When current is applied to the anodized aluminum layer, the dielectric layer is formed, trapping charges between positive and negative plates, which form an electric field. The electric field causes an attraction between the positive and negative charges, increasing the capacitance and thus increasing the holding capacity of the capacitor. As the voltage across the capacitor increases, so does the electric field, and thus the amount of energy stored in the capacitor increases as well. When the voltage increases to its rated maximum rating, no more energy can be stored, and the capacitor reaches its maximum allowed capacitance value. After that point, the capacitor acts like an open circuit, and no more current can pass through.The ECO-S1HA182AA and other aluminum electrolytic capacitors are widely used in many applications. They are especially commonly used in power supplies, audio systems, and telecommunications applications. In these applications, they help stabilize voltage, reduce electrical noise, act as a filter, and store and release energy. In addition, they can also provide protection for components from high voltage transients and can even be used as snubbers in motor start circuits.Overall, the ECO-S1HA182AA is a great example of an aluminum electrolytic capacitor that is well suited for many different applications. It delivers reliable performance, has a high ripple current capacity, and a wide operating temperature range. Its working principle is also quite simple and straightforward, making it easy to understand how it can be used in various situations.The specific data is subject to PDF, and the above content is for reference
Latest Products
UUJ2G330MNQ6ZD
CAP ALUM 33UF SMD33F 400V Aluminum Elect...
UUJ2G330MNQ6MS
CAP ALUM 33UF SMD33F 400V Aluminum Elect...
UUJ2E680MNQ6ZD
CAP ALUM 68UF SMD68F 250V Aluminum Elect...
UUJ2E680MNQ6MS
CAP ALUM 68UF SMD68F 250V Aluminum Elect...
UUJ2D101MNQ6ZD
CAP ALUM 100UF SMD100F 200V Aluminum Ele...
UUJ2D101MNQ6MS
CAP ALUM 100UF SMD100F 200V Aluminum Ele...