ECO-S1JA222CA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are the most commonly used capacitors in modern electronics. They are widely used in power supplies, audio systems, and other applications in industrial, automotive, and consumer electronics. The ECO-S1JA222CA is a type of aluminum electrolytic capacitor with performance that makes it appropriate for a wide range of applications.

The ECO-S1JA222CA has an electrolytic capacitor design with an anode made of aluminum foil, layers of electrolyte and separator, and a cathode made of a special copper-alloyed foil. The aluminum foil is covered with a thin dielectric oxide surface layer to increase its conductivity. The dielectric oxide layer also adds to the lifetime of the capacitor by protecting the aluminum from corrosion due to exposure to the electrolyte.

The ECO-S1JA222CA is designed to handle applied voltages up to 16 VDC with voltage ripple ranges of maximum 120 mVp-p. The capacitance range varies depending on the size of aluminum foil and electrolyte used. It also offers tight tolerance of ±20% compared to other aluminum electrolytic capacitors. The capacitor has a very low dissipation factor (leakage current) of around 0.25mΩ and leakage current ranges from 0.0025μA to 0.009μA. These features make it suitable for use in circuits with high input impedance, low noise, and applications requiring high stability.

The ECO-S1JA222CA has a high capacitance value per volume ratio. This helps to reduce the volume of the capacitor body, which in turn results in lower application costs and easier installation. Its low ESR also ensures that the capacitor can handle high pulsed power and frequencies up to 1MHz. Moreover, ECO-S1JA222CA has a very good shelf life of up to 5,000 hours at 105 degrees Celsius and can withstand up to 85C operating temperature with no performance degradation.

The ECO-S1JA222CA has a wide range of applications in various industries. It is suitable for use in high voltage DC power supplies, servo amplifiers, machine tools, motors and transformers. It can also be used in filtering, bypass and decoupling of electronic circuits, and audio systems. Its performance makes it especially suitable for applications in industrial, automotive, and consumer electronics.

The working principle of the ECO-S1JA222CA is based on the separation of electrodes by a thin film of an electrolyte. The electrolyte is between two layers of aluminum foil electrodes. When the capacitor is energized, the electrolyte reacts with the electrodes to create a thin oxide film on the surface of the electrodes. This oxide film acts as a dielectric material, storing the electrical charge and allowing current to flow from one electrode to the other.

The ECO-S1JA222CA has evolved as a reliable and economical capacitor solution for a variety of applications. It has proved to be an excellent choice for use in power supplies, audio systems, and other electrical and electronic applications. Its small footprint and high capacitance value ratio make it an ideal choice for tight spaces, and it can be used in a wide range of temperatures.

The specific data is subject to PDF, and the above content is for reference