ECO-S2AA332EA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are non-polarized capacitors inherently consisting of an anode pre-treated aluminum foil, an electrolyte formed by a solution of boric acid and a cathode aluminum foil (separate from anode) with an insulating-paper separator between them. This arrangement resembles the electrodes of a traditional electrochemical cell, allowing for the formation of an electrical double-layer (EDL). The charge (electricity) can resist separation of the two electrodes, providing a capacitance.

ECO-S2AA332EA

ECO-S2AA332EA is an aluminum electrolytic capacitor, and very popular in the industry. Its features, including long life, low leakage current, low ESR, small size and operating temperature range from -55℃ to 105℃, make it quite effective in many applications.

Application Field

ECO-S2AA332EA is widely used in consumer electronic products, communications systems, power supplies, automated electronic equipment, switches, and many other applications where a low impedance compact size is desired.

Working Principle

The ECO-S2AA332EA operates based on aluminum electrolytic capacitors. It is made up of two aluminum foils and an electrolytic paper. One of the foils is rolled into a spiral and acts as an anode while the other one serves as a cathode. In between the two aluminum foils there is an electrolytic paper containing boric acid. This acts as a separator, an insulator, and an electrolyte.

The current flow within the ECO-S2AA332EA is determined by the capacitance of the capacitor itself. This is determined by the thickness and area of the foil electrodes and the spacing between them. The electric field created between the electrodes is responsible for providing the electrostatic forces that hold the charge on the capacitor plates. As the electric field increases with the increase of voltage, the capacitance increases until it reaches a point called the saturation voltage, beyond which further increase in voltage has no effect.

An electrostatic charge can be created in ECO-S2AA332EA when a voltage is connected between its terminals. The internal electrostatic fields enable current to flow through it until the electrostatic charge is dissipated due to the leakage current of the electrolyte. Thus, when connected to a circuit, it will act as a charge storer, quickly responding to any changes in the voltage.

The ECO-S2AA332EA also requires a small amount of energy to begin charging and to sustain its charging. The energy is provided by a source connected to the terminals, which can be either DC or AC. The ECO-S2AA332EA can work at both high and low frequencies but is slightly prone to noise at high frequencies. Thus, the ECO-S2AA332EA should be shielded from electromagnetic radiation so that it can function efficiently at high frequencies.

In summary, the ECO-S2AA332EA is an aluminum electrolytic capacitor, highly reliable and robust. Its features make it suitable for a variety of applications, from consumer products to automated electronics. Furthermore, its working principle allows for efficient current flow and voltage control, as well as avoiding electromagnetic interference due to its shielding design.

The specific data is subject to PDF, and the above content is for reference