Allicdata Part #: | P6854-ND |
Manufacturer Part#: |
ECO-S2GA331DA |
Price: | $ 0.00 |
Product Category: | Capacitors |
Manufacturer: | Panasonic Electronic Components |
Short Description: | CAP ALUM 330UF 20% 400V SNAP |
More Detail: | 330µF 400V Aluminum Electrolytic Capacitors Radial... |
DataSheet: | ECO-S2GA331DA Datasheet/PDF |
Quantity: | 1000 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
1 +: | 0.00000 |
Polarization: | Polar |
Package / Case: | Radial, Can - Snap-In |
Mounting Type: | Through Hole |
Surface Mount Land Size: | -- |
Height - Seated (Max): | 2.047" (52.00mm) |
Size / Dimension: | 1.181" Dia (30.00mm) |
Lead Spacing: | 0.394" (10.00mm) |
Ripple Current @ High Frequency: | 1.89A @ 100kHz |
Ripple Current @ Low Frequency: | 1.35A @ 120Hz |
Applications: | General Purpose |
Ratings: | -- |
Series: | TS-HA |
Operating Temperature: | -25°C ~ 105°C |
Lifetime @ Temp.: | 3000 Hrs @ 105°C |
ESR (Equivalent Series Resistance): | 402 mOhm @ 120Hz |
Voltage - Rated: | 400V |
Tolerance: | ±20% |
Capacitance: | 330µF |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Obsolete |
Lead Free Status / RoHS Status: | -- |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Aluminum electrolytic capacitors are passive components that store energy in an electric field. They consist of a dielectric material, two metal plates, and an anode. In this type of capacitor, the metal plates and anode are made from aluminum foil, which has a very thin layer of oxidized aluminum. The capacitor works by allowing electric current to flow back and forth between the plates, through the dielectric material. As the plates charge, they form an inductive-capacitive energy storage system, and the electric field produced between them is capable of storing electrical energy.
The ECO-S2GA331DA aluminum electrolytic capacitors are widely used in many electronic automotive, industrial, computer, medical, consumer, and telecommunications applications. They are typically used for filtering, bypassing, coupling, and decoupling components in circuits. The capacitor has a rated voltage of 50V and a capacitance of 4700µF. It has a maximum plant operating temperature of +105 °C and a dissipation factor of ≤ 0.15%. The capacitor is available in lead-free finishes, with axial or radial leads. The lead-free finish is compliant to RoHS.
The capacitors have a cylindrical body which contains an electrolytic solution and two metal plates. The two metal plates are made of aluminum, and a thin layer of anodic oxidized aluminum foil is used as anode. A dielectric material is used to separate the two metal plates, which is typically either a paper or a plastic film. The capacitor has two terminal leads, which allow a current to flow through the capacitor.
The working principle of the ECO-S2GA331DA aluminum electrolytic capacitors is based on Faraday’s law. Faraday’s law states that the magnitude of the emf induced in an electric circuit is proportional to the rate of change of the magnetic flux. When a current flows through the capacitor, it produces an electric field in between the plates. This electric field accumulates energy. The energy accumulates until the electric field reaches a certain maximum value and then prevents any further current flow.
The ECO-S2GA331DA aluminum electrolytic capacitors also have a self-healing property. When a failure occurs in the capacitor due to overvoltage or short-circuiting, the capacitor automatically repairs itself by forming new conductive channels inside the capacitor. This self-healing property eliminates the need for replacement of the capacitor, which can be both time-consuming and expensive.
The ECO-S2GA331DA aluminum electrolytic capacitors are used in a variety of applications, such as automotive, industrial, computer, medical, consumer, and telecommunications. They are used for filtering, bypassing, coupling, and decoupling components in circuits, and they can be used to store energy in electric fields. The capacitor has a maximum plant operating temperature of +105 °C and a lead-free finish compliant to RoHS. The capacitor also has a self-healing property, which eliminates the need for replacement and can save time and money.
The specific data is subject to PDF, and the above content is for reference
CAP ALUM 33UF SMD33F 400V Aluminum Elect...
CAP ALUM 33UF SMD33F 400V Aluminum Elect...
CAP ALUM 68UF SMD68F 250V Aluminum Elect...
CAP ALUM 68UF SMD68F 250V Aluminum Elect...
CAP ALUM 100UF SMD100F 200V Aluminum Ele...
CAP ALUM 100UF SMD100F 200V Aluminum Ele...