EEE-FC1C470AP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are passive components that store energy electrostatically in the form of a field. They are typically made with aluminum foil and two or more layers of metalized film separator. EEE-FC1C470AP are a type of aluminum electrolytic capacitor with snap-on terminals features, which are primarily used as energy storage and buffering capacitors in circuits.

In its simplest form, the construction of an EEE-FC1C470AP aluminum electrolytic capacitor consists of a single anode foil aluminum electrolyte separated by a separator film from a single cathode foil with the terminations soldered on to each. This design is referred to as a Non-Polar capacitor as the polarity of the device remains the same regardless of how it is connected. This simplification makes the capacitor ideal for applications that require a straightforward construction and reliable operation.

The primary application fields of EEE-FC1C470AP capacitors are in bypassing and decoupling circuits. In these applications, the capacitors serve to provide a buffer between the positive and negative rails of the circuit and reduce any potential noise from power switching devices. Encapsulated in resin cases, the capacitors provide protection from humidity and contact with other circuit elements. Depending on their size, the capacitors can have a variety of terminations ranging from Solder Tabs and Leads, which allow for mounting to Printed Circuit Boards (PCBs) easily, to Wire-Lead terminations which are used for in-line wiring.

The working principle of EEE-FC1C470AP capacitors is based on the electrochemical process between the two plates (Anode and Cathode) and the electrolyte. When a voltage is applied to the capacitor, electrons move in a free flow around the capacitor, creating an Electric Field. This electric field then stores energy in the form of an electric charge on the capacitor plates. The higher the voltage, the greater the electric field and the greater the amount of energy stored. The capacitors ability to hold an increasing amount of charge also depends on its size.

As a result of the working principle, the EEE-FC1C470AP capacitor can be used in a variety of applications, both digital and analog. In digital circuits, where the switching of high-current devices needs to be buffered, the capacitor can act as a buffer, reducing the chances of current surges when switching devices. Additionally, when placed in series with a power supply, the capacitors can help to smooth out any ripples, providing a more stable voltage.

In analog circuits, the EEE-FC1C470AP capacitor serves to reduce noise, allowing for a more reliable signal. The capacitors act as a high-pass filter, allowing for high-frequency signals to pass with minimal interruption while attenuating any low-frequency signals. The capacitors can also be placed in parallel across load resistors or voltage sources, providing additional current when required.

In conclusion, EEE-FC1C470AP aluminum electrolytic capacitors are one of the most widely used types of capacitors in circuits. With their simple construction and reliable operation, the capacitors can provide both buffering and filtering in circuits. Their ability to handle high-current loads and provide a stable voltage supply has made them invaluable in a variety of applications.

The specific data is subject to PDF, and the above content is for reference