EET-HC1V822JJ

Polarization:	Polar
Package / Case:	Radial, Can - Snap-In
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.260" (32.00mm)
Size / Dimension:	0.984" Dia (25.00mm)
Lead Spacing:	0.394" (10.00mm)
Ripple Current @ High Frequency:	3.335A @ 10kHz
Ripple Current @ Low Frequency:	2.9A @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	HC
Operating Temperature:	-40°C ~ 105°C
Lifetime @ Temp.:	2000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	35V
Tolerance:	±20%
Capacitance:	8200µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Electrolytic capacitors are a common component used in most electrical and electronic circuits, including consumer electronics and industrial automation devices. Aluminum electrolytic capacitors are a type of electrolytic capacitors which utilize an oxide film on aluminum foil as the dielectric. The EET-HC1V822JJ is one such type of aluminum electrolytic capacitor.In terms of application field, the EET-HC1V822JJ is primarily used in power circuits, such as solar and wind power systems, automation systems, and communication systems. These capacitors are also widely used in places where high ripple currents and voltage spikes are expected, such as high-powered end-stage audio equipment.In terms of working principle, the EET-HC1V822JJ utilizes an electrolytic solution and a thin aluminum oxide layer which acts as the dielectric in between the two electrodes of the capacitor. When no voltage is applied, the oxide layer is thin enough to allow capacitance connection between the two electrodes. When a voltage is applied, the potential difference causes a chargesplit, which gradually increases the oxide layer’s thickness. This increases the dielectric strength and improves the capacitor’s stability.The construction of the EET-HC1V822JJ consists of an aluminum foil layer coated with aluminum oxide, with the set terminal and pole connected to the foil layer. The oxide coating is further covered with an electrolyte solution. A thin separator gel acts as the insulation layer between the aluminum oxide layer and the electrolyte solution. The separator gel further helps reduce the probability of leakage insulation and enhances the capacitor’s efficiency.The EET-HC1V822JJ is known for its excellent surge performance and heat-resisting characteristics. This capacitor is also notable for its low electrical leakage, low ESR, and long-term reliability. The capacitor’s long-term stability and reliability are enhanced by its use of a screw-type design and its use of non-magnetic and non-flammable materials.In conclusion, the EET-HC1V822JJ is an aluminum electrolytic capacitor used for high ripple currents and voltage spikes in power circuits. Its screw-type design, excellent surge performance, low electrical leakage, low ESR, and long-term reliability make it an ideal choice for many applications that demand high-quality and long-term reliability.

The specific data is subject to PDF, and the above content is for reference