EET-HC2V471JA

Polarization:	Polar
Package / Case:	Radial, Can - Snap-In
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	2.047" (52.00mm)
Size / Dimension:	0.984" Dia (25.00mm)
Lead Spacing:	0.394" (10.00mm)
Ripple Current @ High Frequency:	1.96A @ 10kHz
Ripple Current @ Low Frequency:	1.4A @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	TS-HC
Operating Temperature:	-25°C ~ 105°C
Lifetime @ Temp.:	2000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	353 mOhm @ 120Hz
Voltage - Rated:	350V
Tolerance:	±20%
Capacitance:	470µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are an important form of electronic components for storing and transferring electrical energy. Their purpose is to control the flow of current in current-sensitive applications where large current flows are required and a large storage capacity is needed. The capacitors, especially the ET-HC2V471JA, are often used for applications such as smoothing power output, providing input and output filtering, and providing overcurrent protection in RF transmitters and mobile communication device power supplies. The ET-HC2V471JA aluminum electrolytic capacitor is used in a wide variety of applications, including analog and digital circuit design, decoupling of power supply lines, buffer applications, and filtering in communication equipment. A combination of physical size constraints of the component, operating temperature, operating life expectancy, and highly competitive component pricing are the primary factors that influence the selection of an ET-HC2V471JA for the best application. The working principle of the ET-HC2V471JA capacitor is simple but effective. All aluminum electrolytic capacitors, whether manufactured or bought, consist of a metal foil roll called the element. This foil roll is etched to create a large number of small pores along its entire length. The element is then saturated with a viscous liquid or electrolyte, which acts as the medium of charge transfer. When a voltage is applied to the aluminum electrolytic capacitor, electrons from the positive end of the battery move through the liquid electrolyte and fill the pores in the foil element. This produces a strong electrostatic field within the capacitors which is used to store electrical energy. The amount of energy stored is dependent upon the voltage applied to the capacitor. The ET-HC2V471JA aluminum electrolytic capacitor has some advantages over other capacitor types because of its high operating temperature capabilities and extremely high capacitance performance in comparison to its physical size. This makes it suitable for a wide range of applications, including RF power transmission, noise filtering, and protection circuits. Another advantage is the longer life expectancy of the ET-HC2V471JA capacitor, due to its efficiency and durability. Overall, the ET-HC2V471JA aluminum electrolytic capacitor is a very reliable performance-oriented component, with very few drawbacks, and is well suited for current-sensitive applications where a high storage capacity is needed. Its simple working principle makes it widely applicable in a multitude of fields and its high-capacitance performance allows it to be used in applications where other types of capacitors are unable to provide the same level of performance.

The specific data is subject to PDF, and the above content is for reference