EEU-FC1J471L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are often used for various reasons and requirements, particularly for filtering or decoupling. They are particularly known for their low equivalent series resistance (ESR) and high capacitance values, making them ideal in applications where low ESR is required and capacitance values are large. The EEU-FC1J471L is a compact, high quality, single-ended aluminum electrolytic capacitor. It is used in a wide variety of applications, such as circuits that require an improved dc filter response, power supply decoupling and high current pulse loads.

The EEU-FC1J471L has a case size of 25x11x10mm and leads with a pitch of 6.5mm. It is available in various capacitance values, ranging from 100uF to 2200uF, with a maximum operating temperature of 85°C and a maximum ripple current of 2.3A. The capacitor can withstand a maximum voltage of 16V.

An aluminum electrolytic capacitor’s construction is composed of two etched aluminum foils, a separator, non-solvent electrolyte, and an electrolytic paper separator. The capacitor’s dielectric oxide layer is formed at the interface between the anodic aluminum foil and the electrolyte, forming an anode with high capacitance, allowing electrons to flow more easily through the electrolyte.

The EEU-FC1J471L is ideal for power supply lines with high AC currents, due to its low equivalent series resistance (ESR). It replaces bulky electrolytic and tantalum capacitors, thus making them ideal for use in space-constrained printing circuit boards, where the capacitor’s small size allows for greater flexibility. The capacitor offers protection against voltage surges and has high ripple current capability, enabling it to handle high current pulse loads that occur when a short circuit occurs.

The EEU-FC1J471L supports a wide range of frequency response, from audio frequencies to very high frequencies. Its high ripple current capability ensures that the capacitor can deliver current even under various switching frequencies. The capacitor’s high capacitance and low ESR, ensure that it can deliver peak current and dissipate heat faster, protecting the capacitor from harm.

The EEU-FC1J471L works on the principle of Faraday’s Law. This law states that a current is induced in a conductor when exposed to a changing magnetic field, and this current is proportional to the rate of change in the magnetic field. The capacitor works by storing static electric charges and converting them into electronic signals when a current is applied across its terminals. Due to its construction, the aluminum electrolytic capacitor produces good insulation, enabling it to transfer current easily, while also providing reliable protection against losses.

The EEU-FC1J471L is the ideal choice for applications, where an improved dc filter response, power supply decoupling, and high current pulse loads are expected. Its low ESR, high capacitance, high ripple current, and narrow range of frequency response, make it an ideal choice for such applications. It is also classified as an all-purpose capacitor, due to its suitability for such wide range of applications.

The specific data is subject to PDF, and the above content is for reference