EEU-FM0J331

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.500" (12.70mm)
Size / Dimension:	0.248" Dia (6.30mm)
Lead Spacing:	0.098" (2.50mm)
Impedance:	130 mOhms
Ripple Current @ High Frequency:	455mA @ 100kHz
Ripple Current @ Low Frequency:	318.5mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	FM
Operating Temperature:	-40°C ~ 105°C
Lifetime @ Temp.:	2000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	6.3V
Tolerance:	±20%
Capacitance:	330µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>Aluminum electrolytic capacitors are a type of capacitor used in electronics, with a variety of applications. In this article, we&#8217;ll discuss the EEU-FM0J331 aluminum electrolytic capacitor and its application field and working principle.</p><p>Aluminum electrolytic capacitors are composed of two aluminum foils, sandwiched between two layers of a dielectric made of an electrolyte solution. The electrolyte solution acts as both a conductor and an insulator, making the capacitor a hybrid of both elements. The two aluminum foils act as plates, with the electrolyte separating them. When a voltage is applied across the two foils, charges accumulate on either plate, with the opposite charges generating an electrical field between them. This electrical field stores energy, making the capacitor essentially a battery.</p><p>The EEU-FM0J331 aluminum electrolytic capacitor has a rated voltage of 10 volts and a capacitance of 100 uF. It is sold on Digi-Key website, under the Nichicon brand, with a value range from 1uF to 330uF. The capacitance tolerance is only 10%, which is why the capacitor is well-suited for applications that require high accuracy in both frequency response and transient response times. The EEU-FM0J331 is also available in a surface-mount version, with an operating temperature range up to 105&#176;C.</p><p>The EEU-FM0J331 aluminum electrolytic capacitor can be used in various applications, such as audio amplifiers, DC power supplies, switching power supplies and pulse circuits. It is used in audio circuits to eliminate noise and stabilize the output signal. It is used in DC power supplies to smooth out the input voltage and provide energy during sudden changes in the input voltage. In switching power supplies, it is used to limit the rise and fall time of the switch and provide a steady source of energy. And in pulse circuits, the capacitor is used to store energy during pulse operation so that the circuit can provide a steady and consistent output.</p><p>The EEU-FM0J331 aluminum electrolytic capacitor has a variety of other applications as well. It is used in electronic filters to reduce noise, stabilize voltages and extend the frequency response of the filter. It is also used in motor controllers, providing a stable voltage source to the motor and allowing it to start and stop faster. The capacitor can also be used in motor generators, providing a stable source of current to the device. Finally, it is used in timers, providing a stable voltage for accurate and reliable time delays.</p><p>In terms of its working principle, the EEU-FM0J331 aluminum electrolytic capacitor can be explained like this: when a voltage is applied across the two plates, the electrolyte between them is ionized, creating a charge on each plate proportional to the applied voltage. This causes the capacitor to store energy in the form of electrical charge, just like a battery. The voltage can then be discharged, which is why the capacitor is often referred to as a temporary battery. When the voltage is removed, the capacitor will slowly discharge the stored energy.</p><p>The EEU-FM0J331 aluminum electrolytic capacitor is a fantastic device for a variety of applications, including audio and DC power supplies, switching power supplies, pulse circuits, electronic filters, motor controllers and motor generators. Even though aluminum electrolytic capacitors are known for their inherently large size, the EEU-FM0J331 is also available in a surface-mount version, allowing it to be used in smaller devices. The narrow capacitance tolerance of 10% makes it ideal for applications that require precision, such as DC power supplies and audio amplifiers. And its working principle can be summarized as using electricity to store energy, just like a battery.</p>

The specific data is subject to PDF, and the above content is for reference