EEU-FR1A102L

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.650" (16.50mm)
Size / Dimension:	0.315" Dia (8.00mm)
Lead Spacing:	0.138" (3.50mm)
Impedance:	41 mOhms
Ripple Current @ High Frequency:	1.24A @ 100kHz
Ripple Current @ Low Frequency:	930mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	FR
Operating Temperature:	-40°C ~ 105°C
Lifetime @ Temp.:	8000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	10V
Tolerance:	±20%
Capacitance:	1000µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are devices that store electrical energy in an electric field and are used to control current flow in electronic circuits. The two main types of aluminum electrolytic capacitors are axial, which have two leads coming out of either end, and radial, which have two leads exit the same side of the casing. This article focuses on the EEU-FR1A102L application and working principle.The EEU-FR1A102L is an axial aluminum electrolytic capacitor with a rated capacitance of 1000µF and a rated voltage of 10V. It has two radial leads that exit opposite ends of the casing and is polarized, meaning it can only be used in a circuit with positive and negative terminals correctly connected to the positive and negative capacitor leads.When used in a circuit, the EEU-FR1A102L is designed to absorb the electrical energy in the circuit and reduce voltage spikes. It does this using a basic working principle; when a current is passed through an electrolyte and metal plates, metal ions in the electrolyte are oxidized and deposited on one metal plate, creating an electrical double layer. This creates an electric field between the metal plates, causing an electrical charge to build up, which is then stored in the capacitor and can be discharged back into the circuit when necessary.In the case of the EEU-FR1A102L, the aluminum case acts as the metal plate, and it contains an electrolyte solution of borax, boric acid and water. The two leads are typically copper with a dipped manganese dioxide coating for better conductivity.When it is used in a circuit, the EEU-FR1A102L can store up to 1000µF at 10V depending on the temperature of the surrounding environment, and can discharge this energy back into the circuit when needed. It can also be used as part of a filter such as a low-pass filter in an AC circuit to reduce the amount of high-frequency noise in a circuit.The EEU-FR1A102L has a measured size of just 15x60mm, and a weight of 6g. It has an operating temperature range of -25 to 70C, and a maximum ripple current of 1.8A. It is also rated to withstand a maximum of 350V.Overall, the EEU-FR1A102L is a reliable, efficient and cost-effective aluminum electrolytic capacitor that is perfect for use in a wide range of electronic circuits. It is small, lightweight, and robust enough to take on most electrical and environmental stresses with ease, making it an ideal component for any circuit requiring an efficient power storage solution.

The specific data is subject to PDF, and the above content is for reference