EEU-FS0J202B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors, or short form Aluminum electrolytic, are capacitors with capacitance made out of a foil and an electrolyte. They are usually large in physical size and typically provide extensive capacitance value when compared to other capacitor types. The EEU-FS0J202B is a type of aluminum electrolytic capacitor. It has a maximum ripple current and a maximum capacitance of 240 mA and 200 uF respectively and a rated voltage of 6.3 VDC. It is designed for a wide range of applications such as power line decoupling, noise suppression and filtering, and general purpose high frequency filtering.

The EEU-FS0J202B capacitor is made of a dielectric material and consists of two metallic foils separated by a thin layer of electrolyte. The anode and cathode plates face each other and are widths of 1-2 cm (1/10-1/5 inch). The two plates are connected to the leads of the circuit, then electrolyte is added in-between the two plates by soaking them in a solution of alkali or acid, provocating a chemical reaction and the formation of a thin film of aluminum oxide. This film of aluminum oxide acts as the dielectric material that acts as insulation and determines the voltage rating of the capacitor as well as controls the amount of current that can flow through the arrangement.

The amount of capacitance of the EEU-FS0J202B is determined by the thickness of the dielectric material, the area of the plates, the reversal voltage of the plates, and the permittivity of the dielectric. The permittivity of the dielectric is directly related to the temperature, humidity of the environment, and the size and shape of the aluminum oxide film. The permittivity of the aluminum oxide film increases as the temperature increases, thus increasing the capacitance of the capacitor. The EEU-FS0J202B capacitor has a maximum rated temperature of 85°C and should not be exposed to any temperatures above that in order to avoid damaging the capacitor.

The EEU-FS0J202B can be used in a variety of applications, ranging from signal processing to industrial controls. It can also be used in general-purpose high frequency filtering, power line decoupling, and noise suppression. Additionally, it can be used in voltage regulation to absorb transients, or in low-pass filters for signal conditioning. It is important to note that aluminum electrolytic capacitors have some of the highest leakage currents, which should be taken into account when selecting the type of capacitor for the application.

The EEU-FS0J202B can also be used in high voltage applications where its voltage rating is comparable to other types of capacitors. It is especially useful in high voltage applications due to its high capacitance and low ESR, which results in a small amount of heat produced by the capacitor. This makes the EEU-FS0J202B an attractive capacitor for high voltage applications. However, its large physical size may make it impractical for some applications.

In conclusion, the EEU-FS0J202B is a type of aluminum electrolytic capacitor which is designed for a wide range of applications. It has a maximum ripple current and a maximum capacitance of 24 mA and 200 uF respectively and is designed for low-pass filters, noise suppression, power line decoupling, and voltage regulation applications. Its high capacitance and low ESR make it an attractive choice for high voltage applications, but its large physical size can be a limiting factor.

The specific data is subject to PDF, and the above content is for reference