EEU-FS1C821LB

Ratings:	--
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.650" (16.51mm)
Size / Dimension:	0.315" Dia (8.00mm)
Lead Spacing:	0.197" (5.00mm)
Impedance:	41 mOhms
Ripple Current @ High Frequency:	1.24A @ 100kHz
Ripple Current @ Low Frequency:	930mA @ 120Hz
Applications:	General Purpose
Series:	FS
Polarization:	Polar
Operating Temperature:	-40°C ~ 105°C
Lifetime @ Temp.:	8000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	16V
Tolerance:	±20%
Capacitance:	820µF
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Box (TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are electronic components used to store electrical energy in an electrical circuit. They are constructed with two aluminum plates separated by an insulating material known as the dielectric. A thin layer of electrolyte bridges the two plates, acting as a separator under normal operating conditions. These capacitors possess a very high capacitance-to-volume ratio, making them very useful in high power applications where the available space is limited.The EEU-FS1C821LB is a series of aluminum electrolytic capacitors that has been designed for use under harsh conditions. It is an axial electrolytic capacitor, meaning it is constructed with two leads that protrude from either end of the device. This allows for easy installation into a circuit board, making it an ideal choice for surface-mount applications. The EEU-FS1C821LB is rated at 1.8V and is able to withstand a temperature range of -30 to 85 degrees Celsius. This makes it suitable for use in many industrial and commercial applications, including outdoor installations that are subject to extreme temperatures. Its performance also makes it very useful in applications such as inverters, switching power supplies and other high-current circuits. One of the main advantages of aluminum electrolytic capacitors is their ability to store a large amount of energy in a relatively small package. The EEU-FS1C821LB is able to do just that, with a rated capacity of 2200µF. This makes it an excellent choice for power supply filtering and decoupling applications where a low ESR is a primary requirement.The working principle of the EEU-FS1C821LB is relatively simple. Current flows from one lead to the other and is stored in the capacitor\'s dielectric. A thin layer of electrolyte acts as a separator, ensuring that the current does not “short-circuit” between the two terminals. When the capacitor is charged, charge builds up on the plates, creating an electric potential difference between them that is proportional to the voltage flowing in the circuit. When the voltage is cut off, the charge stored in the capacitor remains, allowing it to provide a steady supply of current during brief interruptions in the power supply.The EEU-FS1C821LB is also equipped with a safety mechanism to protect it from damage during surges in voltage. It has a built-in current limit that will shut off the current if the voltage reaches a certain level, preventing damage to the device. The EEU-FS1C821LB has a wide range of industrial and commercial applications, from power supply filtering to speed control. Its high capacitance-to-volume ratio makes it an ideal choice for applications where space is limited. It is also capable of withstanding extreme temperatures, making it suitable for outdoor installations. The built-in safety mechanism ensures that the device does not become damaged even during brief power surges. Its robust construction and reliable performance make it an excellent choice for any application.

The specific data is subject to PDF, and the above content is for reference