EEV-HA2A4R7P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors, such as the EEV-HA2A4R7P, are passive electronic components, typically consisting of two metal plates separated by an insulator (dielectric) such as paper or plastic film. The metal plates are usually made of aluminum sheets, and impregnated in an electrolyte. The plates are connected to two external leads for connection to an external circuit of some kind.

These capacitors are used for their high capacitance values over small physical sizes. They are used in a variety of applications ranging from motor controls, as filter units, and motor run autotransformers. This particular type of capacitor, the EEV-HA2A4R7P, is especially suited for applications such as lamp dimmers, motion control circuits, and soft start motor control circuits.

The primary working principle of aluminum electrolytic capacitors such as the EEV-HA2A4R7P is capacitive reactance. This means that the lower the capacitive reactance, the greater the current flow between the two plates of the capacitor. This, in turn, will result in a higher capacitance. The capacitance is determined by the size and shape of the metal sheets used, the dielectric material between each sheet, and the amount of electrolyte inside. The amount of electrolyte is what determines the final capacitance of the capacitor.

As previously mentioned, one of the uses of the EEV-HA2A4R7P capacitor is in motor control circuits. In these applications, the capacitor is connected in parallel to the motor load. This helps to reduce the peak inrush current of the motor when it starts up. This is especially important when using motors in high torque, low speed applications. By having the capacitor in parallel with the motor load, the inrush current of the motor is reduced. This, in turn, can cause reduced power loss, increased efficiency, and improved life of the motor.

Other applications where the EEV-HA2A4R7P aluminum electrolytic capacitor can be used include power supplies, audio-frequency amplifiers, switching power supply filters, and power factor correction circuits. In power supplies, the capacitor is connected in parallel with the inductor, and helps to reduce the ripple voltage. In audio-frequency amplifiers, the capacitor works to improve the signal to noise ratio of the amplifier. Finally, in power factor correction circuits, the capacitor is used to reduce the power dissipated by the circuit.

This type of capacitor has several distinct advantages over other types of capacitors. These include low equivalent series resistance, high operating temperatures, long lifetimes, large dynamic range and low DC leakage current. While these benefits make them well suited for many applications, caution should be taken when handling aluminum electrolytic capacitors as improper usage can lead to excessive heat buildup and destruction of the capacitor.

In conclusion, aluminum electrolytic capacitors such as the EEV-HA2A4R7P, provide high capacitance values over small physical sizes, making them suitable for a variety of motor control, audio-frequency, and power factor correction applications. This type of capacitor is especially noted for its low equivalent series resistance, high operating temperatures, long lifetimes, large dynamic range and low DC leakage current. However, it is important to exercise caution when handling aluminum electrolytic capacitors as improper usage can lead to excessive heat buildup and destruction of the capacitor.

The specific data is subject to PDF, and the above content is for reference