EEV-TG2A100P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors basically consist of two aluminum foils that are separated by a dielectric layer. The aluminum foil acts as an anode, while the other acts as a cathode. This basic construction is then inserted within a cylindrical container, which is usually made of aluminum and equipped with a valve. The whole unit is known as an electrolytic capacitor.
The alternating current required to power an aluminum electrolytic capacitor is usually generated by a rotating or oscillating electrical field. It is this alternating electrical current that is responsible for charging and discharging the capacitor. An EEV-TG2A100P aluminum electrolytic capacitor is rated at 100 volts. This means that it can be used in a variety of applications including motor control applications, variable speed drives, and frequency control devices.

When an electric current enters the anode (positively charged aluminum foil) of the EEV-TG2A100P capacitor, it also passes through the dielectric layer (which acts like an insulator) and is then ionized. This ionization causes a reaction within the aluminum foil and the electrons from the anode are attracted to the cathode. This creates a charging effect, which results in a buildup of charge. This charge then creates a potential difference between the two foils and this is known as the capacitance.

The capacitance of the aluminum electrolytic capacitor is determined by the size of the container, the thickness of the dielectric layer and the voltage. The greater the capacitance, the more energy can be stored in the capacitor. At the same time, the higher the applied voltage, the greater the capacitance. This is why the EEV-TG2A100P capacitor is rated at 100 volts, as this increases the amount of charge that can be stored in the unit.

The aluminum electrolytic capacitor can also be used as a filter for low frequency components of a signal. This is because the foil\'s electrostatic field absorbs these low wattage components, leaving the signal undisturbed. This makes the capacitor a good choice for use in audio signal conditioning, AC line conditioning, and power factor correction applications.

When it comes to safety, the aluminum electrolytic capacitor is considered a very reliable component. This is because, unlike some other types of capacitors, it does not contain any combustible components. In addition, it has a very good failure rate and is resistant to environmental factors such as humidity, temperature, and electrical noise.

The EEV-TG2A100P aluminum electrolytic capacitor is a reliable, cost-effective component that is most often used in motor control applications and variable speed drives. The capacitor can absorb low wattage components and is also resistant to environmental factors. This makes it an excellent choice for applications that require a reliable capacitor that is also cost effective.

The specific data is subject to PDF, and the above content is for reference