Allicdata Part #: | 1046-1130-ND |
Manufacturer Part#: |
EK43711-03 |
Price: | $ 190.58 |
Product Category: | RF/IF and RFID |
Manufacturer: | pSemi |
Short Description: | EVAL BOARD FOR PE43711 |
More Detail: | N/A |
DataSheet: | EK43711-03 Datasheet/PDF |
Quantity: | 4 |
1 +: | $ 173.25000 |
Series: | UltraCMOS®, HaRP™ |
Part Status: | Active |
Type: | Attenuator |
Frequency: | 9kHz ~ 6GHz |
For Use With/Related Products: | PE43711 |
Supplied Contents: | Board(s) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Evaluation and Development Kits, Boards are essential tools for Radio Frequency product development engineers and designers to effectively evaluate, develop and test radio frequency products. The EK43711-03 is a RF Evaluation and Development Kit Board that supports both 2.4GHz and 5GHz frequency bands, and is designed for RF product or circuit evaluation, debugging, and design validation. The board benefits from its low cost and is an efficient and cost-effective way for evaluation, debugging, and product development of RF designs.
The EK43711-03 includes a comprehensive combination of hardware, software, and components necessary for developing 2.4GHz and 5GHz RF products. Each kit contains four board/module a.k.a mini-board, which supports up to 8 channels and includes on-board network adapter, antenna, and cables. This detailed package allows users to quickly evaluate, test, and debug the RF product with confidence.
The main components of the EK43711-03 are the design board and the interface board. The design board consists of an RF transceiver supporting 2.4GHz and 5GHz, an MPEG-2 decoder, and an FPGA. The interface board contains a USB interface, connectors for radio, antenna, and SMA connectors, and an array of voltage-controlled oscillators (VCOs). Each mini-board is designed with a high-density copper foil dielectric layer, which leads to a greater range of the system performance.
The working principle of EK43711-03 is quite straightforward. The RF signal is transmitted and received through the antenna port. The received signal passes through the front-end RF amplifier and filter chain, and then detected by the mixer in the base-band circuits. The detected signal then passes through the analog-to-digital converter (ADC) used for digital signal processing. The base-band signal is then down-converted by the digital signal processor (DSP) to the appropriate frequency range. The digital signal is then fed into the MPEG-2 encoding and decoding engine, or the FPGA. The encoded or decoded signal then passes through the post-processing blocks and then sent out via the USB interface.
The EK43711-03 provides extensive features and flexible, modular architecture for testing mixed-signal design applications. It allows for easy integration and scalability to extend existing product lines, allowing engineers to quickly develop and optimize their RF product designs. It supports both 2.4GHz and 5GHz frequency bands, as well as both TDD and FDD applications. In addition, the board provides an array of modulation techniques such as FSK, QAM, OFDM, UWB, and more. The EK43711-03 is also compatible with a variety of development tools and APIs to enable developers to quickly prototype their designs. Finally, the board features power-saving mode for low-power mobile applications.
In conclusion, the EK43711-03 RF Evaluation and Development Kit Board is a low-cost and efficient solution for RF product development engineers and designers. By simplifying and optimizing the RF product design process, it enables faster design cycles, shorter development time, and higher-quality products. Features such as power-saving mode, high-density signal clock, and multiple modulation techniques make the board a powerful yet cost-effective solution for evaluation, development, and testing of RF product designs.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
EK43502-01 | pSemi | 0.0 $ | 1000 | KIT EVAL FOR PE43502 RF S... |
EK43204-02 | pSemi | 0.0 $ | 1000 | IC RF DSA 2BIT 50 OHM 12Q... |
EK43404-01 | pSemi | 0.0 $ | 1000 | KIT EVAL FOR 43404 RF DSA |
EK43501-01 | pSemi | 0.0 $ | 1000 | KIT EVAL FOR 43501 RF DSA |
EK43503-01 | pSemi | 0.0 $ | 1000 | KIT EVAL FOR 43503 RF DSA |
EK43601-01 | pSemi | 0.0 $ | 1000 | KIT EVAL FOR 43601 RF DSA |
EK43701-01 | pSemi | 0.0 $ | 1000 | KIT EVAL FOR 43701 RF DSA |
EK43602-01 | pSemi | 0.0 $ | 1000 | KIT EVAL FOR PE43602 RF D... |
EK43702-01 | pSemi | 0.0 $ | 1000 | KIT EVAL FOR PE43702 RF D... |
EK43703-01 | pSemi | 0.0 $ | 1000 | KIT EVAL FOR PE43703 DSA |
EK4312-13 | pSemi | 103.95 $ | 21 | EVAL BOARD RF DIGITAL STE... |
EK43704-11 | pSemi | 190.58 $ | 12 | EVAL BOARD DSA 7BIT 50 OH... |
EK43711-03 | pSemi | 190.58 $ | 4 | EVAL BOARD FOR PE43711 |
EK43713-03 | pSemi | 190.58 $ | 3 | EVAL BOARD FOR PE43713 |
EK4314-01 | pSemi | 103.95 $ | 10 | EVAL BOARD RF DGITAL STEP... |
EK43705-11 | pSemi | 190.58 $ | 7 | EVAL KIT FOR RF DSA 7BIT ... |
EK43712-03 | pSemi | 190.58 $ | 3 | EVAL BOARD FOR PE43712 |
EK43205-02 | pSemi | 103.95 $ | 1 | BOARD EVAL FOR PE43205 |
EK4314-02 | pSemi | 103.95 $ | 1000 | EVAL BOARD FOR PE4314 |
JN5179 USB DONGLE FOR ZIGBEE
EVAL BOARD FOR SKY67159-396LF
EVAL BOARD FOR MICRF219A
EVAL BOARD FOR HMC468ALP3
EVAL BOARD NESG250134
BOARD EVAL HMC541LP3E