EL1113(TB)-V

Output Type:	Transistor with Base
Supplier Device Package:	5-SOP
Package / Case:	6-SOIC (0.295", 7.50mm Width), 5 Leads
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 110°C
Vce Saturation (Max):	400mV
Current - DC Forward (If) (Max):	60mA
Voltage - Forward (Vf) (Typ):	1.5V (Max)
Current - Output / Channel:	50mA
Voltage - Output (Max):	80V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	2µs, 3µs
Turn On / Turn Off Time (Typ):	4µs, 3µs
Current Transfer Ratio (Max):	200% @ 10mA
Current Transfer Ratio (Min):	100% @ 10mA
Voltage - Isolation:	5000Vrms
Number of Channels:	1
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The EL1113(TB)-V device from ON Semiconductor is an optoisolator device that features an open-collector transistor output. This device can be used to achieve high isolation between two circuit segments, allowing the transmission of feedback, control signals, and digital data. This article discusses the application fields and working principle of the EL1113(TB)-V.

Application Fields

The EL1113(TB)-V can be used in a variety of applications. It is ideally suited to isolation of feedback, control signals, and digital data in consumer electronics, instrumentation, automation systems, safety systems, and medical applications. In addition, it can be used to isolate input signals from controllers, regulators, and other telecom applications.The EL1113(TB)-V features a low-cost design that is easy to implement in applications that require low power consumption and simple system configuration. It also provides a high level of isolation and a low insertion loss, making it ideal for high-speed signals.

Working Principle

The EL1113(TB)-V is an opto-isolator device with an open-collector transistor output. It has a light-emitting diode (LED) chip that is optically coupled to a high gain silicon photovoltaic cell. The LED chip emits light when the input voltage is applied, illuminating the photovoltaic cell.The photovoltaic cell converts the incident light to a current of reverse-bias voltage. This current is able to regulate and drive the open-collector transistor. The transistor is used to switch circuit segments, allowing them to be isolated from each other.The big advantage of an opto-isolator device is that the isolation between two circuit segments decreases the switching time of the open-collector transistor. This reduces the effect of crosstalk, noise, and any other interference.

Conclusion

The EL1113(TB)-V is an optoisolator device that features an open-collector transistor output. This device can be used in a variety of applications to achieve high isolation between two circuit segments. It is ideally suited for isolation of feedback, control signals, and digital data in consumer electronics, instrumentation, automation systems, safety systems, and medical applications. The working principle of the EL1113(TB)-V is based on an opto-isolator device with an LED chip, a high gain silicon photovoltaic cell, and an open-collector transistor. This device can provide a high level of isolation and a low insertion loss, making it ideal for high-speed signals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description