EL3031S1(TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are internal devices that consist of an input-side optoelectronic module, such as an LED, and an output-side coupling module, such as a CTR-based MOSFET, transistor, SCR, or triac. The EL3031S1 (TB) is a type of optoisolator which applies a silicon-controlled rectifier (SCR) or triac as its output-side coupling module, and this article outlines the application field and working principle of this particular optoisolator.

Application Field of EL3031S1 (TB)

The EL3031S1 (TB) is a highly reliable optoisolator that provides galvanic isolation between the input and output sides of a circuit. This type of optoisolator can be used in a variety of electronic applications such as motor drives, industrial automation, and medical devices. This optoisolator can be applied for use in safety circuits and in power sources for LED lamps and displays. Its most common use is in AC power load control, where it is used to activate the on/off command from the input side to the output side, acting as a remote switch. The EL3031S1 (TB) is also well-suited for switching small or large motors, and for use in switch-mode power supplies.

Working Principle of EL3031S1 (TB)

The EL3031S1 (TB) contains a light-sensitive bipolar transistor in its input-side optoelectronic module. When the device is activated, a light-emitting diode (LED) emits light which is then transformed into forward-biased current by the bipolar transistor. This current then flows into a photovoltaic high-voltage isolation transformer and is supplied to the gate of the output-side SCR or triac. When current is applied to the gate of the SCR or triac, it is activated and enables power to pass through to the load from the AC power source. The EL3031S1 (TB) isolates the input and output sides when in the “off” state. The device can also be used as a voltage- or current-controlled AC switch.

Conclusion

The EL3031S1 (TB) optoisolator is a reliable device which provides galvanic isolation between input and output circuits. Its output side consists of a SCR or triac. This optoisolator is suitable for a variety of applications including AC power load control, switching of motors, or LED lamps and displays. Its working principle follows the flow of current from the input side LED to the output-side SCR or triac, which then passes power through to the load when in the “on” state. This optoisolator provides excellent protection and isolation, making it an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference