EL5375IUZ-T13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EL5375IUZ-T13 is popularly used in a variety of instrumentation and linear applications. From its wide range of operating currents and its low input voltage specifications, it is well suited for use in hundreds of different applications—anywhere a low-level signal must be accurately amplified. In addition, the EL5375IUZ-T13 can be used to amplify low-level signals from sensors, switches, and other motion-sensing devices.

Operating Principle

The EL5375IUZ-T13 is an operational amplifier (“op-amp”) with two distinct parts: the inputs and the outputs. It has two differential input stages, with two Vari Gain stages following each other. At the output, there are two voltage-level peaking stages and one low-frequency roll-off stage. This combination of input stages, gain stages, and output stages form the basis of the EL5375IUZ-T13’s operating principle.

In its simplest operational form, an op-amp consists of two differential inputs (one inverting, one non-inverting), and an output. In the EL5375IUZ-T13, the two inputs are fed into the two different Vari Gain stages. The voltage levels at each input are adjusted with the Vari Gain stages so that the gain of the amplifier is optimized. The two voltage-level peaking stages at the output then provide a low-distortion signal within the desired frequency response. The low-frequency roll-off stage is used to limit the amplifier’s output signal to frequencies below a certain frequency (set by the user).

Applications

The EL5375IUZ-T13 can be used in a variety of applications, but has proven particularly useful in instrumentation and linear applications. For example, it can be used to accurately amplify low-level signals from sensors, switches, and other motion-sensing devices. It is also well-suited for data acquisition, control circuits, and in audio amplifiers, where precision is of paramount importance. Additionally, the EL5375IUZ-T13 can be used in bridge circuits. Bridge circuits are commonly used to measure pressure, temperature, and strain.

The EL5375IUZ-T13 has also been utilized in medical applications, where its precise amplifying capabilities and low voltage operation can be used to accurately detect and measure electrical signals from very small sources, such as amplifying electrocardiogram (ECG) signals. And, its low power and low voltage operation make it a suitable choice for embedded designs.

Conclusion

The EL5375IUZ-T13 is a versatile operational amplifier that is well-suited for use in a wide range of linear and instrumentation applications. Its two differential inputs, two Vari Gain stages, and two voltage-level peaking stages provide the accuracy and precision necessary for a variety of low-level signal applications. With its ability to accurately detect and measure electrical signals from very small sources, it can be used in medical applications, or in data acquisition, control, and audio amplifier circuits. Additionally, thanks to its low power and low voltage operation, the EL5375IUZ-T13 can also be used in embedded designs.

The specific data is subject to PDF, and the above content is for reference