EMI222T-RC Filters |
|
Allicdata Part #: | M9942TB-ND |
Manufacturer Part#: |
EMI222T-RC |
Price: | $ 0.16 |
Product Category: | Filters |
Manufacturer: | Bourns Inc. |
Short Description: | FILTER LC(T) 0.05 OHM/2200PF TH |
More Detail: | LC (T-Type) EMI Filter 3rd Order Low Pass 1 Channe... |
DataSheet: | EMI222T-RC Datasheet/PDF |
Quantity: | 10000 |
2000 +: | $ 0.15182 |
4000 +: | $ 0.14459 |
6000 +: | $ 0.13608 |
10000 +: | $ 0.12758 |
50000 +: | $ 0.11907 |
Current: | 5A |
Height: | 0.315" (8.00mm) |
Size / Dimension: | 0.354" L x 0.126" W (9.00mm x 3.20mm) |
Package / Case: | Radial - 3 Leads |
Mounting Type: | Through Hole |
Voltage - Rated: | 50V |
Applications: | General Purpose |
Operating Temperature: | -25°C ~ 85°C |
ESD Protection: | No |
Values: | R = 0.05 Ohms, C = 2200pF |
Series: | EMIT |
Resistance - Channel (Ohms): | 0.05 |
Attenuation Value: | 25dB @ 45MHz ~ 200MHz |
Center / Cutoff Frequency: | -- |
Number of Channels: | 1 |
Technology: | LC (T-Type) |
Filter Order: | 3rd |
Type: | Low Pass |
Part Status: | Active |
Packaging: | Tape & Box (TB) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
EMI (Electromagnetic Interference) and RFI (Radio-frequency Interference) are two closely related entities that come into play in electrical engineering or radio communication. The EMI and RFI filters are devices used to reduce the amount of EMI/RFI interfering with a system. The two types of filters are LC and RC Networks. An EMI222T-RC is an EMI/RFI filter designed for EMI and RFI filtering applications.
The design of the EMI222T-RC filter features two series capacitors which serve to start the filter to vibrate at its frequency cut-off, as opposed to one capacitor used in the LC filter. This allows for a better EMI shielding and less insertion loss. The filter design also uses an inductor in series with the series capacitors to reduce ringing effects. The filter design also incorporates two parallel capacitors in order to reduce the inductance of the filter and create a more effective EMI shield.
In addition to the two series capacitors and inductor, the EMI222T-RC also incorporates two resistors in a unique configuration. The two resistors are placed in parallel with the inductor, but in opposite directions. This arrangement is referred to as a differential filter. The differential filter is designed so that the voltages appearing across the two resistors differ in phase. This difference in phase helps cancel out the higher frequency components, thus reducing EMI & RFI. Because of this design, the EMI222T-RC filter is ideally suited for EMI/RFI filtering operations in high-frequency environments.
The EMI222T-RC filter is typically used in audio systems, radio and television broadcasters, broadcast/studio recording equipment, and telecommunication systems. In these applications, the filter helps to ensure that the equipment is operating with minimal interference and provides a good environment for the electrical signals. It is also used in high-reliability systems, such as medical and military electronics, where the electrical components must perform reliably in the presence of high levels of EMI/RFI.
When the EMI222T-RC filter is connected to a system, it acts as a suppressor of EMI & RFI interference. The filter effectively reduces the high frequency components that are causing interference in the system. When the filter is placed in a circuit, the inductor and capacitors combine to form a filter network. The inductor increases the reactance of the filter, while the capacitors provide a low capacitance value which reduces the insertion loss. Together, these components work to reduce the amount of EMI/RFI interference in the system.
The EMI222T-RC is designed for applications that require high reliability and extreme immunity to environmental interference. This filter provides a high-level of protection against EMI/RFI, allowing the system to operate reliably in the presence of high levels of environmental noise. It is suitable for both commercial and industrial applications, and can be used for a variety of applications, such as audio and video systems, broadcast equipment, and medical and military electronics.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
EMI2124MTTAG | ON Semicondu... | 0.27 $ | 1000 | COMMON MODE CHOKE 100MA 8... |
EMI2121MTTAG | ON Semicondu... | -- | 1000 | CMC 100MA 2LN SMD ESD2 Li... |
EMI221T-RC | Bourns Inc. | 0.16 $ | 10000 | FILTER LC(T) 0.05 OHM/220... |
EMI271T-RC | Bourns Inc. | 0.16 $ | 8000 | FILTER LC(T) 0.05 OHM/270... |
EMI222T-RC | Bourns Inc. | 0.16 $ | 10000 | FILTER LC(T) 0.05 OHM/220... |
EMI2180MTTBG | ON Semicondu... | -- | 1000 | COMMON MODE CHOKE 2LN SMD... |
EMI220T-RC | Bourns Inc. | 0.16 $ | 1000 | FILTER LC(T) 0.05 OHM/22P... |
EMI2NLKIT | Pulse Electr... | 24.26 $ | 10 | KIT EMI COMMON MODE CHOKE... |
FILTER LC HIGH FREQ 100PF 0805LC (T-Type...
FILTER RC(PI) 100 OHM/12.5PF SMDRC (Pi) ...
FILTER LC(PI) 1750PF CUSTOMLC (Pi) EMI F...
FILTER LC(PI) 0.1UH/5000PF SMDLC (Pi) EM...
FILTER LC 22PF 210MHZ SMDLC EMI Filter 2...
FILTER RC(PI) 100 OHM/8PF SMDRC (Pi) EMI...