Allicdata Part #: | ENC28J60T-I/ML-ND |
Manufacturer Part#: |
ENC28J60T-I/ML |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Microchip Technology |
Short Description: | IC ETHERNET CTRLR W/SPI 28-QFN |
More Detail: | Ethernet Controller 10 Base-T PHY SPI Interface 28... |
DataSheet: | ENC28J60T-I/ML Datasheet/PDF |
Quantity: | 1000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Protocol: | Ethernet |
Function: | Controller |
Interface: | SPI |
Standards: | 10 Base-T PHY |
Voltage - Supply: | 3.1 V ~ 3.6 V |
Current - Supply: | 160mA |
Operating Temperature: | -40°C ~ 85°C |
Package / Case: | 28-VQFN Exposed Pad |
Supplier Device Package: | 28-QFN (6x6) |
Base Part Number: | ENC28J60 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Interface - Controllers are standardized communication devices that enable server-based information, control and processes to be accessed by outside users, applications, and devices. The ENC28J60T-I/ML is an interface - controller that is used in a wide variety of applications due to its simplicity, reliability, and affordability. Its working principle and application field are elaborated below.
Application Field
The ENC28J60T-I/ML is primarily a 10/100Mbs Ethernet controller with integrated physical layer (PHY) and MAC layer support. It is designed for easy replacement and software compatibility with existing Ethernet applications. Its small package size and low pin count make it suitable for cost-sensitive applications. In addition to the Ethernet controller, it has other features such as an SPI interface, timer, IRQ, and support for various network protocols, making it highly versatile. The ENC28J60T-I/ML is used primarily in industrial applications, including factory automation, lighting applications, energy monitoring, and transportation/railway safety.
Working Principle
The ENC28J60T-I/ML works on the basis of microcontroller (MCU) systems. The MCU communicates with the ENC28J60T-I/ML controller through a serial peripheral interface (SPI). The SPI uses a full-duplex protocol for communication between the MCU and the ENC28J60T-I/ML. The controller consists of two components: a MAC controller and a PHY controller. The MAC controller performs most of the data processing, including the error control. The PHY controller handles the physical layer communications.
The ENC28J60T-I/ML supports several standard Ethernet interfaces, including 10BaseT, 100BaseT and half/full-duplex variants. It also supports Ethernet II and 802.3 frame formats. To ensure data integrity, the ENC28J60T-I/ML implements several hardware checksums and error detection algorithms. The controller also supports various network protocols such as IPv4, TCP, UDP, ICMP, and IGMP, thus making it suitable for various applications.
The ENC28J60T-I/ML includes several integrated modules such as pulse width modulation (PWM) generators, IRQ, timer, watchdog timer, and serial peripheral interface (SPI). All of these are managed by the on-chip microcontroller, which is responsible for the correct operation and communication of the ENC28J60T-I/ML. The controller also has a power-saving mode, which allows it to reduce the power consumption when in idle state. This makes the controller highly suitable for cost-sensitive embedded applications that require low power consumption.
The ENC28J60T-I/ML is a versatile and reliable Ethernet controller that can be used in a number of applications. Its low pin count and small package size make it suitable for cost-sensitive applications. Additionally, its support for various Ethernet and network protocols allow it to be used in a number of industrial applications, including factory automation, lighting applications, energy monitoring, and transportation/railway safety. Finally, its low power consumption and easy-to-use SPI interface makes it a great choice for embedded applications that require reliable Ethernet communications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
ENC20000 | Red Lion Con... | 60.55 $ | 1000 | ENCLOSURE PANEL METERS NE... |
ENC28J60T/SS | Microchip Te... | 1.68 $ | 1000 | IC ETHERNET CTRLR W/SPI 2... |
ENC28J60T-I/ML | Microchip Te... | -- | 1000 | IC ETHERNET CTRLR W/SPI 2... |
ENC28J60/ML | Microchip Te... | 0.0 $ | 1000 | IC ETHERNET CTRLR W/SPI 2... |
ENC28J60/SO | Microchip Te... | 0.0 $ | 1000 | IC ETHERNET CTRLR W/SPI 2... |
ENC28J60/SP | Microchip Te... | 0.0 $ | 1000 | IC ETHERNET CTRLR W/SPI 2... |
ENC28J60-I/SS | Microchip Te... | -- | 2584 | IC ETHERNET CTRLR W/SPI 2... |
ENC28J60/SS | Microchip Te... | -- | 2001 | IC ETHERNET CTRL 8K W/SPI... |
ENC28J60-I/SO | Microchip Te... | -- | 1400 | IC ETHERNET CTRLR W/SPI 2... |
ENC28J60-I/ML | Microchip Te... | -- | 2988 | IC ETHERNET CTRLR W/SPI 2... |
ENC28J60-I/SP | Microchip Te... | -- | 1215 | IC ETHERNET CTRLR W/SPI 2... |
ENC28J60T/ML | Microchip Te... | 0.0 $ | 1000 | IC ETHERNET CTRLR W/SPI 2... |
ENC28J60T/SO | Microchip Te... | 0.0 $ | 1000 | IC ETHERNET CTRLR W/SPI 2... |
ENC28J60T-I/SS | Microchip Te... | 1.68 $ | 1000 | IC ETHERNET CTLR SPI 28SS... |
ENC28J60T-I/SO | Microchip Te... | -- | 1000 | IC ETHERNET CTRLR W/SPI 2... |
ENC28J60-H | Olimex LTD | 12.25 $ | 517 | MICROCHIP ETHERNET SPI MO... |
MOD-ENC28J60 | Olimex LTD | 10.4 $ | 1000 | MICROCHIP ETHERNET UEXT M... |
IC UART TXRX 128/384 BYTE 16QFNUSB Bridg...
IC CONTROLLER USB 36QFNUSB Hub Controlle...
IC CONTROLLER ETHERNET 48SSOPEthernet Ph...
IC USB PWR CTRLR DUAL 8-SOICUSB Controll...
IC LINK LAYER CONTROLLER 176-BGAIEEE 139...
IC UART DUAL I2C/SPI 32-HVQFNRS232, RS48...