EP3C10E144A7N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FPGAs are integrated circuits that are programmed after the device is manufactured. They can be reconfigured dynamically as needed, and generally consume much less power and have higher processing speeds than microprocessors or application-specific integrated circuits (ASICs). The EP3C10E144A7N is a field programmable gate array with embedded 256-bit block SRAM. It has eight independent IO blocks each containing an 8-bit flash programmer and 512-bit Kintex UltraScale memory controller. This FPGA is designed for 8-bit and 16-bit microprocessors, while also supporting multiplexed memory buses, an integrated TEA bus, and a chip-level cycle-accurate emulation interface.

EP3C10E144A7N is an ideal choice for embedded system design requiring a robust and reliable FPGA. It is a high-performance device with a wide range of features. The Double Data Rate (DDR) controller supports up to four channels of SDRAM memory and is capable of operating with up to four banks of DDR, DDR2 and DDR3 memories. The integrated 18K block RAM gives the device a large amount of internal memory. Additionally, the EP3C10E144A7N has a built-in 10/100/1000 Ethernet MAC and supports up to four PCIe interfaces. Moreover, the FPGA supports a variety of clock management features such as reset generators, clock multipliers and dividers, and phase locked loops (PLLs).

The EP3C10E144A7N is suitable for a wide range of applications due to its high-performance, low-power and low-cost features. The EP3C10E144A7N is designed for use in control and automation, communications, automotive, consumer electronics, medical electronics, military applications and other embedded applications requiring programmable logic devices with robust FPGA solutions. The device provides several low-power, high-performance logic solutions such as x1/x4/x8/x16 data bus widths, multiplexed memories, and dedicated I/O for automotive and consumer applications. It can be used for implementing data plane processing in VoIP, voice recognition and video processing applications. Additionally, the EP3C10E144A7N can be used in military and aerospace applications requiring safety certification and a wide operating temperature range.

The working principle of the EP3C10E144A7N can be seen in two stages: first the configuration, and then the operation. Configuring the FPGA involves loading a bitstream into it, which is created by the FPGA designer and determines how the logic of the FPGA is to be arranged and operated. To do this, the bitstream must be loaded into the FPGA’s embedded memory which happens through a device programming interface, such as JTAG or the ICSP protocol. This can be done through a specific programmer connected to the FPGA with dedicated programming cables or through the embedded bootstrap circuit provided in the package.

Once the FPGA is configured and powered on, it begins to operate as designed by the bitstream. The FPGA can generally be said to be operating in two modes of operation: combinatorial logic mode and sequential logic mode. In combinatorial logic mode, the FPGA responds to the signals being input to it and instantly produces the corresponding output signals. In sequential logic mode, the FPGA responds to inputs, calculates the logic needed to produce the expected output, and then produces the output. The EP3C10E144A7N’s embedded RAM blocks can be used to store and retrieve data, helping to make the FPGA’s operation faster and more efficient.

In conclusion, the EP3C10E144A7N from Altera is a high-performance, low-power and low-cost FPGA device suitable for a wide range of embedded applications. It is designed to support communication requirements such as VoIP, video processing, Ethernet, and PCIe. The configuration and operation of the FPGA can be done through a specific programmer connected to the FPGA with dedicated programming cables or through the embedded bootstrap circuit provided in the package. The integrated block RAM and DDR controller help to make the FPGA’s operation more efficient, which increases its performance in the applications it can be used in.

The specific data is subject to PDF, and the above content is for reference