EPC1LI20N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

In addition to the configuration Memory available on each FPGA, the use of Electronic Programmable Configuration Devices are recommended to reliably store the configuration data. The primary benefit is the protection of the FPGA configuration data and the freedom to use reliable Code Data Protection features.

EPC1LI20N is a series of high-density, single-level configurable configuration PROMs designed in TSOP and WFBGA package configurations. With its wide operating voltage, the EPC1LI20N supports an industry-standard 20-pin configuration interface and 1.8 V to 3.0 V I/O. Other features include a two-bit error detection capability for maximum configuration reliability and a built-in erase function for a universal device deployment.

EPC1LI20N configuration PROMs offer prime and temperature-stable parameters, factory-programmable OTP and byte-wise write and erase operation, and are a great fit in FPGAs and SoCs. These single-level configuration packages come with a reliable and secure battery-less configuration update capability and benefits, such as providing on-chip configuration data before the power-on-reset. With its simple three-wire serial bus communications interface, the FPGA configuration process can be flow without the need for in-system programming operations.

The EPC1LI20N configuration PROMs use different technologies to write, read and store the configuration data to the PROM. The data is stored using an EEPROM technology and the data is checked and read using an on-board RAM controller. The EPC1LI20N also uses a special erase system, which allows the PROMs to be programmed in a universal manner and the programmer can be used for multiple applications.

The EPC1LI20N can be used in a variety of different application fields. The most common applications are field-programmable gate arrays (FPGAs) and systems-on-chip (SoCs), but other applications such as larger logic designs can also benefit from the use of EPC1LI20N PROMs. Additionally, devices such as mixed-signal chips and embedded memory modules can be programmed with the devices for program bits. In addition, the PROMs can also be used to program multiple I/O lines with an external circuit when the FPGA or SoC is not located at the edge of the board.

The EPC1LI20N can be used as an FPGA configuration prom to store configuration data, with a wide voltage operating range, it also provides easy-to-access troubleshooting capabilities and erase features, among other features. Additionally, the PROMs are temperature-stable and feature additional error detection capabilities. Programmed with logic one or zero, the EPC1LI20N can be used to program the logic outputs of the FPGA.

The EPC1LI20N is a great fit for FPGAs, providing reliable single-level package configuration capabilities and data protection options. With its simple three-wire communications, and uniform programming, it can take all the guesswork out of the FPGA configuration and allow for easy setup and troubleshooting. With its wide working voltage and temperature-stable performance, the EPC1LI20N delivers high-performance configuration capabilities and data protection that can be used in multiple applications.

The specific data is subject to PDF, and the above content is for reference