ES1010SI Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ES1010SI is a popular IC hot swap controller designed and supplied by E-Switch. It is a member of the E-Switch family of PMIC products.

The ES1010SI is a dedicated controller for hot swap applications and is a cost-effective solution for the design of hot-swappable systems. It provides a regulated current path from the battery to the system load, allowing the load to remain connected even when a controlled battery disconnect is required. The IC operates from a 2.5V to 7.5V supply voltage from the battery, and has a separate 0.8V to 13.5V source for the load.

The ES1010SI comes in an 8-pin, small SOT-23 surface-mount package. It has an integrated MOSFET with an adjustable current sense resistor, and a current sensing input. It also has an output voltage control pin and an enable pin which can be used to drive an external control signal.

The ES1010SI is designed to operate in hot-swap applications and has several features that help manage current and prevent overcurrent events. First, it features a current limit threshold (CCV) to protect the system and equipment against any current over-rush that may occur following a hot-swap event. Additionally, it has an adjustable overcurrent/short-circuit detection threshold, which can be set to prevent damage in the case of a short-circuit.

The ES1010SI also includes an undervoltage lockout (UVLO) and an adjustable soft start feature. When the battery voltage drops below the UVLO threshold, the IC automatically turns off the load to prevent damage. The soft start feature also helps prevent overcurrent inrush when the load is started.

Finally, the ES1010SI includes thermal cut off protection which prevents thermal runaway if the load dissipates too much power. It also has a built-in temperature monitor to detect any abnormal temperature increase in the IC.

In summary, the ES1010SI is a highly integrated hot swap controller designed to protect the system and equipment against any current over-rush that may occur following a hot-swap event. It has several features including overcurrent protection, undervoltage lockout, soft start and thermal cut off protection that make it reliable and cost-effective.

The specific data is subject to PDF, and the above content is for reference