ES2C-TP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

  ES2C-TP is a type of diode rectifier, typically used as a single-phase, high power rectifier. The primary function of the device is to convert alternating current (AC) to direct current (DC). The rectifier is made up of a single diode element, or a network of diode elements.

  The working principle of an ES2C-TP rectifier is relatively straightforward. When an AC voltage is applied to the rectifier, the diode element turns on and off depending on the applied voltage. During the ‘on’ period, the diode allows current to flow through it. On the other hand, during the ‘off’ period, the diode restricts current flow. This is repeated over and over again and is referred to as ‘pulsing’.

  The frequency of this pulsing is determined by the frequency of the applied AC voltage. In the ES2C-TP, the frequency is approximately 30 kHz, allowing the device to provide a fast switching rate which is beneficial where speed and efficiency are critical.

  Single phase rectifier applications usually require the device to be mounted directly on the AC power line. This is because single phase applications usually require a lot of power, and direct connection to the AC power line ensures that the rectifier can handle the required power. The ES2C-TP is no exception, and is typically mounted directly on the AC power source.

  Another important consideration for single phase rectifier applications is surge protection. This is because single phase rectifier applications are susceptible to large transient voltages, which commonly occur when the AC power source is switched on or off. To protect the rectifier from these transient voltages, the ES2C-TP includes a thermal protection circuit. The circuit monitors the rectifier’s temperature and if it reaches a certain threshold, the rectifier is automatically shut off. This prevents the rectifier from overheating and protects its components.

  The ES2C-TP is a versatile device, and can be used in a variety of applications. One of the most common uses is in photovoltaic systems, where the device is used to convert the solar energy into DC power. The device is also widely used in industrial motor control systems, as well as in a variety of lighting applications, including LED lighting systems.

  In conclusion, the ES2C-TP is a single-phase, high-power rectifier which converts alternating current (AC) to direct current (DC). It is typically mounted directly on the AC power line, and includes a thermal protection circuit which protects the device from over temperature conditions. It can be used in a variety of applications, including photovoltaic systems, industrial motor control systems and lighting systems.

The specific data is subject to PDF, and the above content is for reference