Allicdata Part #: | FD1000016-ND |
Manufacturer Part#: |
FD1000016 |
Price: | $ 3.31 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Diodes Incorporated |
Short Description: | OSCILLATOR XO 10.000MHZ CMOS SMD |
More Detail: | 10MHz XO (Standard) CMOS Oscillator 3.3V Enable/Di... |
DataSheet: | FD1000016 Datasheet/PDF |
Quantity: | 1000 |
100 +: | $ 2.97675 |
Frequency Stability: | ±25ppm |
Current - Supply (Disable) (Max): | 10µA |
Height - Seated (Max): | 0.051" (1.30mm) |
Size / Dimension: | 0.197" L x 0.126" W (5.00mm x 3.20mm) |
Package / Case: | 4-SMD, No Lead |
Mounting Type: | Surface Mount |
Ratings: | -- |
Current - Supply (Max): | 15mA |
Operating Temperature: | -20°C ~ 70°C |
Series: | SaRonix-eCera™ FD |
Voltage - Supply: | 3.3V |
Output: | CMOS |
Function: | Enable/Disable |
Frequency: | 10MHz |
Type: | XO (Standard) |
Base Resonator: | Crystal |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators
An oscillator is an electronic circuit which produces periodic signals such as sine waves or square waves. It is a building block of many electronic circuits used in a variety of consumer and industrial products. The FD1000016 oscillator is a type of oscillator which is capable of providing stable and precise output signals in a wide range of applications.
Applications of the FD1000016
The FD1000016 oscillator can be used in a variety of applications where precise, low power signals are required. It is often used in communications systems, such as GSM, LTE, and WCDMA radios, as they generate the frequency necessary for them to operate. It is also often used in avionics and other precision timing applications such as GPS receivers.
Working Principle of the FD1000016
The FD1000016 oscillator works by using a combination of digital logic and analog circuitry. An oscillating signal is generated by rapidly switching between different voltage states. This signal is then amplified by an amplifier stage. Finally, the amplified signal is then fed to a controller which can adjust the frequency and stability of the output signal as needed.
Advantages of the FD1000016
The FD1000016 oscillator has several advantages over other types of oscillators. It is capable of providing stable and precise output signals over a wide frequency range and can be used in a variety of applications. It is also low power and cost effective. Additionally, it has a low phase noise, which makes it suitable for use in applications where low noise is desired.
Disadvantages of the FD1000016
The FD1000016 oscillator also has some disadvantages. The output signal may drift over time, so it requires frequent calibration and adjustment. Additionally, the output signal is relatively low power and may not be suitable for higher power applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
FD1000R17IE4BOSA2 | Infineon Tec... | 381.77 $ | 1000 | IGBT MODULE VCES 1700V 10... |
FD1000R17IE4DB2BOSA1 | Infineon Tec... | 457.6 $ | 1000 | MODULE IGBT PRIME3-1IGBT ... |
FD1000R33HE3KBPSA1 | Infineon Tec... | 1.39 $ | 1000 | IGBT MODULE VCES 1700V 10... |
FD1000R33HL3KBPSA1 | Infineon Tec... | 1.39 $ | 1000 | IGBT MODULE VCES 1700V 10... |
FD1000017 | Diodes Incor... | 3.31 $ | 1000 | OSCILLATOR XO 10.000MHZ C... |
FD1000016 | Diodes Incor... | 3.31 $ | 1000 | OSCILLATOR XO 10.000MHZ C... |
FD1000015 | Diodes Incor... | 3.31 $ | 1000 | OSCILLATOR XO 10.000MHZ C... |
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...