FD1000017

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electrical circuits that can generate a recurring signal, typically with a particular frequency. The FD1000017 application field and working principle of an oscillator is one such important electrical circuit, used in the engineering sector due to its robust design and reliable results.

The FD1000017 oscillator is primarily used in the audio amplifiers, which typically have to ensure a continuous low frequency sine wave output. Oscillators in general are used to produce reliable and consistent sine waves, while the FD1000017 variant can generate sine waves in the range of 0.3 Hz to 10 kHz. It is capable of providing clean, reliable signals even at high frequencies, and is an ideal choice for audio amplifiers.

The FD1000017 oscillator works on the same principle as other oscillators. It consists of an amplifier, connected to an LC tank circuit. The amplifier produces an oscillation of the current, which then passes through the LC tank circuit, causing it to vibrate at its resonant frequency. This frequency is determined by the capacitance-inductance value (C-L) of the LC tank circuit.

The FD1000017 oscillator also uses a voltage-controlled oscillator (VCO) in the form of an integrated circuit. This allows the user to control the frequency of the oscillator by varying the voltage applied to the VCO. This is a key feature of the FD1000017, as it gives the user greater control over the frequency and waveform of the signal.

Another key feature of the FD1000017 oscillator is the use of a high-frequency second-order filter. This filter ensures that the output is of high quality, by removing any spurious noise that might be present in the signal. This helps to ensure that the output signal is clean and consistent, with no unwanted artifacts.

The FD1000017 oscillator is an ideal choice for a variety of audio applications, due to its robust design and reliable output. It is capable of providing reliable sine wave signals in the range of 0.3 Hz to 10 kHz, with very low levels of electrical noise. The user can control the frequency and waveform of the signal using a voltage-controlled oscillator, while also benefit from a high-frequency second-order filter, which ensures that the output is of high quality.

The specific data is subject to PDF, and the above content is for reference