FD2000047

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	10µA
Height - Seated (Max):	0.051" (1.30mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	15mA
Operating Temperature:	-20°C ~ 70°C
Series:	SaRonix-eCera™ FD
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Enable/Disable
Frequency:	20MHz
Type:	XO (Standard)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The FD2000047 oscillator is a silicon-based oscillator that provides enhanced frequency stability and improved sensitivity over other oscillator technologies. It is designed for use in a variety of applications, including frequency synthesizers, radio receivers, and crystal oscillators. This paper will discuss the application fields and working principles of the FD2000047 oscillator.

Oscillator Applications

The FD2000047 oscillator is ideal for use in frequency synthesizers due to its low power consumption and high level of performance. It is also ideal for use in radio receivers, providing accurate and stable tuning without the need for high-precision, frequency-stabilizing components like crystals. Additionally, the oscillator is capable of being tuned over a wide range of frequencies with the addition of capacitors in either the input or output leads. This makes it suitable for use in crystal oscillators, where the output frequency can be adjusted over a wide range to meet the specific needs of an application.

Working Principle

The FD2000047 oscillator works on the principle of feedback. A voltage or current is applied to the input leads of the oscillator, and the output is a periodic voltage or current, with the frequency determined by the components of the oscillator. The components of the oscillator can be adjusted to allow the frequency to be tuned over a wide range.The oscillator consists of a feedback loop between two transistors. The input of the first transistor is connected to the output of the second transistor, and the output of the first transistor is connected to the input of the second transistor. This feedback loop causes the two transistors to oscillate at a certain frequency determined by the components of the oscillator.When a voltage or current is applied to the input of the oscillator, it causes the transistors to oscillate at a certain frequency based on the components of the oscillator. The frequency of the oscillation is then tuned by adjusting the components of the oscillator, allowing the oscillation frequency to be adjusted over a wide range.

Conclusion

The FD2000047 oscillator is a silicon-based oscillator designed for use in a variety of applications, including frequency synthesizers, radio receivers, and crystal oscillators. It is capable of producing periodic voltages or currents over a wide range of frequencies, with the frequency determined by the components of the oscillator. The oscillator works on the principle of feedback, where a voltage or current is applied to the input leads and the output is a periodic voltage or current determined by the components of the oscillator. With the ability to adjust the frequency over a wide range of frequencies, the FD2000047 oscillator is ideal for use in a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description