FD3000016

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators, such as the FD3000016, are commonly used in radio frequency applications. The FD3000016 comes with several features and is a highly reliable oscillator that is commonly used in a variety of applications, including satellite and terrestrial radio communications, automotive telemetry, wireless communication systems, industrial instrumentation, and medical systems.

The FD3000016 is a negative voltage controlled oscillator (NCO) designed to operate on a single 5 volt supply. It is a low-noise, frequency-stabilized oscillator with a wide operating frequency range of 0.3MHz to 8GHz. The oscillator has an output power of up to 27dBm. It has a spurious suppression better than 40dBc and a harmonic suppression of better than 50dBc. It also has a wide tuning range of up to 10GHz with excellent frequency stability and phase noise performance. The oscillator also has a low phase jitter of 50fs typ. The oscillator has excellent phase noise characteristics of -140dBc/Hz at 1MHz off the carrier.

The working principle of the FD3000016 oscillator is based on the simplest type of oscillator circuit, the Colpitts. This circuit is used to generate electrical oscillations by combining two capacitors and the inductance of an inductor. The capacitors are connected on either side of the inductor to form a resonant circuit, and the change in the capacitance of the individual capacitors is used to vary the frequency of the signal produced by the oscillator. The frequency of the signal can be adjusted by changing the values of the capacitors. The circuit is driven by an external current source. The output signal of the oscillator is the oscillatory voltage across theInductance of the inductor.

The FD3000016 oscillator also utilizes a voltage-controlled oscillator (VCO) topology for wide frequency range generation. A VCO is an arrangement of an inductor, a capacitor, and a voltage-controlling element. The voltage-controlling element can be a diode-capacitor combination or a voltage-controlled resistor. The capacitance of the voltage-controlled element is varied with the application of an external control voltage. By varying the capacitance, the frequency of the oscillator can be adjusted. The output of the oscillator is then taken from the nodes of the VCO where the voltage potential of the node changes with the frequency of the oscillator.

In summary, the FD3000016 oscillator is a highly reliable and widely used NCO for a range of radio frequency applications. It features a wide tuning range, excellent spurious suppression, a low phase jitter, and excellent phase noise characteristics. The working principle is based on the Colpitts oscillator, and a VCO topology is utilized for wide frequency range generation. It is suitable for use in satellite and terrestrial radio communications, automotive telemetry, wireless communication systems, industrial instrumentation, and medical systems.

The specific data is subject to PDF, and the above content is for reference