FDH444TR Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes form an essential component in a wide range of electronic circuits. They are most commonly used to regulate the flow of current in one direction, usually from a higher voltage to a lower voltage. Rectifiers are diodes that provide this rectification, or conversion, of alternating current to direct current in a circuit. Single rectifiers, like the FDH444TR, are one type of rectifier that can be used in high power applications.

The FDH444TR is a fast-switching, medium-power rectifier with a maximum current rating of 15 A and a peak point forward voltage drop of 1.1 V. It is a type of single rectifier diode, which means it is composed of only one junction and can only pass current in one direction. Single rectifiers are the simplest type of rectifier, and they are ideal for applications that require a minimum amount of rectification such as switching mode power supplies and DC-DC converters.

The FDH444TR functions as a medium-power bridge rectifier. Its operating to maximum junction temperature range is -55 to +175 °C, and its medium power avalanche capability make it suitable for use in automotive circuit applications. The maximum repetitive peak reverse voltage rating is 300 V, and it has a high power dissipation rating of 70 W.

In a typical circuit, the FDH444TR provides a full-wave rectified output of the alternating current power source. The diode is usually connected between the negative pole and the output terminal of the circuit, and its operation is dependent on its forward bias. When the power source is in the positive half-cycle of the alternating current, the positive terminal of the power source is connected to the positive terminal of the FDH444TR. This causes current to flow through the FDH444TR and the voltage drops across the diode. As the current passes through the diode, it creates a positive output to the output terminal of the circuit.

When the power source is in the negative half-cycle of the alternating current, current flows in the opposite direction. The FDH444TR is still biased in the same way, but current flows from the output terminal of the circuit to the negative terminal of the power source, thereby creating a negative output voltage. This is the full-wave rectification process.

The FDH444TR is a versatile rectifier that can be used in many high-power applications. Its fast switching time makes it suitable for high frequency applications, and its medium power avalanche capability can be used for automotive circuit applications. Its one-way, medium power operation is ideal for switching mode power supplies, DC-DC converters, and medium-power bridge rectifiers.

The specific data is subject to PDF, and the above content is for reference